Engineering Construction Screw Pile Driver
Model NO.: 6105
Certification: CE
Condition: New
Trademark: BAFANG
Transport Package: Generally Wooden Box
Specification: 17T
Origin: China
HS Code: 8401200000
New design pile driver for sale
The pile driver consists of a pile hammer, a pile frame and ancillary equipment. The pile hammer is attached between two parallel vertical guide rods (commonly known as gantry) at the front of the pile frame, and lifted with a lifting hook. The pile frame is a steel structure tower with a winch at the rear to lift the pile and pile hammer. In front of the pile frame, there are two guide frames composed of guide rods to control the piling direction so that the piles accurately penetrate into the stratum according to the design position. The basic technical parameters of the pile driver are the impact part weight, impact kinetic energy and impact frequency. The power source of the pile hammer can be divided into drop hammer, steam hammer, diesel hammer, hydraulic hammer and so on.
The pile driver consists of a pile hammer, a pile frame and ancillary equipment. The pile hammer is attached between two parallel vertical guide rods (commonly known as gantry) at the front of the pile frame, and lifted with a lifting hook. The pile frame is a steel structure tower with a winch at the rear to lift the pile and pile hammer. In front of the pile frame, there are two guide frames composed of guide rods to control the piling direction so that the piles accurately penetrate into the stratum according to the design position. The basic technical parameters of the pile driver are the impact part weight, impact kinetic energy and impact frequency. The power source of the pile hammer can be divided into drop hammer, steam hammer, diesel hammer, hydraulic hammer and so on.
Parameter
| Dimension(cm) | 860*226*325 | |
| Max drill depth(m) | 15m | |
| Max hole diameter(cm) | 200 | |
| Winch lifting(T)/power(kw) | 1.5/3 | |
| Oil tank motor power(kw) | 6 | |
| Engine unit | Engine type | 6105 |
| Engine power(kw) | 110 | |
| Walking type | Wheel type | |
| Rotation angle | 180° | |
| Travel speed(km/h) | 50 | |
| Total weight(T) | 9 | |
| Wheel base(mm) | 3250 | |
About us
Â
Pvc Injection Machine,Syringe Injection Molding Machine,Plastic Injection Machine
Greenst Machinery Co., Ltd. , http://www.nbgreenstmachinery.com