Fs2 Gold Detector for Treasure Hunting

         FS2 Gold Detector for Treasure Hunting

 

Introduction:

FS2 is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an all-purpose treasure detector.



The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and threshold, and a unique discrimination control system. These features also make for a great relic-hunting detector, especially when the FS2 is outfitted with the optional 11" DD search coil. While the FS2 makes for a highly competent coin-shooting detector, its user interface and features are not specifically designed for this purpose. As a coin-shooter, you will notice that the FS2 exhibits slightly lower sensitivity to high conductivity coins, like a U.S. quarter; this is a result of its specialized design to emphasize sensitivity to small low conductivity metals like gold nuggets.


Device Specifications:
 
Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest
Operating principle: VLF induction balance
Operating frequency: 19 kHz, crystal controlled
Ground balance range: From ferrite to salt water inclusive
Discrimination ground suppression: Combination of 2" and 3" order methods
Target 10 ground suppression: 3rd order
Operating temp range: 14 to 122 degrees F (-10 to +50 C)
Weight: 2 Ibs, 8 oz with battery installed
Batteries: Single 9 volt rectangular alkaline
Standard search coisl: 5"+11"

Product accessories details:

Specification:
           FS2 Gold Detector for Treasure Hunting

 

Introduction:

FS2 is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an all-purpose treasure detector.



The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and threshold, and a unique discrimination control system. These features also make for a great relic-hunting detector, especially when the FS2 is outfitted with the optional 11" DD search coil. While the FS2 makes for a highly competent coin-shooting detector, its user interface and features are not specifically designed for this purpose. As a coin-shooter, you will notice that the FS2 exhibits slightly lower sensitivity to high conductivity coins, like a U.S. quarter; this is a result of its specialized design to emphasize sensitivity to small low conductivity metals like gold nuggets.


Device Specifications:
 
Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position arm rest
Operating principle: VLF induction balance
Operating frequency: 19 kHz, crystal controlled
Ground balance range: From ferrite to salt water inclusive
Discrimination ground suppression: Combination of 2" and 3" order methods
Target 10 ground suppression: 3rd order
Operating temp range: 14 to 122 degrees F (-10 to +50 C)
Weight: 2 Ibs, 8 oz with battery installed
Batteries: Single 9 volt rectangular alkaline
Standard search coisl: 5"+11"

Product accessories details:

Specification:
 

Simple Lifting Emulsifier

Simple Lifting Emulsifier,Emulsifying Machine Mixing Tank,Vacuum Emulsifying Machine,Lift Emulsify Tank

Wenzhou Zoncic Machinery Technology Co.,Ltd , https://www.zoncicmachinery.com