Hex Head Self Drilling Screw with EPDM Washer Zinc Plated Good Quality 10# 1" Motorcycle Parts Stainless Steel Hand Tool

ABOUT OUR COMPANY:

Since 2002 year we found the 1st plant,  we have been engaged in producing excellent fasteners: self-drilling screws, tapping screws, confirmat screws, T-17 wood screws, drywall screws, chipboard screws, wedge anchors, etc. For standard fasteners, our volumeis appr. 6000 ton per year; for Non-standard items. appr. 3000 tons per year. All equipments are from Taiwan. The quality complies with the international standards. We'd like to have a long-term cooperation with customers around the world.

ABOUT OUT THIS SCREW PRODUCTS:


Our products are well accepted by customer in China, South Asia, Middle West, Centrial American and etc.

Haiyan Oulai insist in spirit of "the quality is life". We sincerely invite domestic or foreign businessmen to discuss potential cooperation. We believe that we will approved a long-term business in future.

Any questions,i'm here waiting for you.


Best Regards.









  ABOUT OUR COMPANY:

Since 2002 year we found the 1st plant,  we have been engaged in producing excellent fasteners: self-drilling screws, tapping screws, confirmat screws, T-17 wood screws, drywall screws, chipboard screws, wedge anchors, etc. For standard fasteners, our volumeis appr. 6000 ton per year; for Non-standard items. appr. 3000 tons per year. All equipments are from Taiwan. The quality complies with the international standards. We'd like to have a long-term cooperation with customers around the world.

ABOUT OUT THIS SCREW PRODUCTS:


Our products are well accepted by customer in China, South Asia, Middle West, Centrial American and etc.

Haiyan Oulai insist in spirit of "the quality is life". We sincerely invite domestic or foreign businessmen to discuss potential cooperation. We believe that we will approved a long-term business in future.

Any questions,i'm here waiting for you.


Best Regards.









 

Water-Cooled Industrial Chiller

New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding
process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling.
They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surrounding factors. Therefore they
are necessary good equipments in modern industry.
1) Cooling temperature range 5-35°C.
2) High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition.
3) Tube-in-shell condensers with excellent heat transfer and rapid cooling.
4) Stainless steel warm-keeping water tank.
5) R22 refrigerant to be used for efficient cooling.
6) R407 environment-friendly refrigerant is optional to use.
7) Overload protection for compressor, pump.
8) Independent Temperature Controller, anti-freeze protection.
9) Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10) Warm-keeping design for all piping to avoid partial convection.
11) Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products

Introduction:
RCM-W series water cooled Industrial Chiller are applicable for cooling moulds to reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries
with the need of cooling.

Features:
Cooling temperature range 5~35°C.

Adopts stainless steel made insulated water tank and evaporator.

Equipped with anti-freeze thermostat.

R22 refrigerant is used as standard and optional R407 for efficient cooling.

Refrigeration loop controlled by high and low pressure switches.

Compressor and pump overload relays.

All adopt [COPELAND" US Brand compressors.

RCM-W series adopts tube-in-shell condenser design for quick heat transfer and excellent heat radiation.

Level meter of water tank is available as an option.

Low pressure pumps are standard configurations, while middle or high pressure pumps are optionally available.

Water-cooled industrial chiller schematic structure:

Screw Type Water-Cooled Industrial Chiller

Screw Type Water-Cooled Industrial Chiller,Industrial Chiller,Industrial Water Chiller,Screw Type Industrial Chiller

Ningbo Beilun Rhong Machinery Manufacturing Co., Ltd. , https://www.rhongmachinery.com