High Active Anti Rain, Glass Coating for Rainy Day

Glass Coating

Features
 
  Using world-class technology strength , combined with a special fluorine ions added Super F12 super anti-wear agent .After using this product , it will form a thin layer of special coating layer on top of the front windshield , very smooth , has a strong water-repellent effect , rain on the window glass into crystal drops slip away quickly , especially in the fast lane over 38 km per hour , the splash of water drops on the window glass was immediately blown away by the wind generated by traveling,even without wipers, you can freely safe driving in the rain special effects continued for about three months , easy to operate , easy to clean.
 
Instructions:
1.Please cover closed before a good , uniform shaking.
2.Make application under good weather, using super oil film removal agent , remove the glass dust, dirt and oil film and dry it without leaving any water.
3.Spray it evenly on the surface of rearview glass,in case of splashing or dropping in on other places,wipe it off by the water immediately.
4. In case of splashing or hanging from the glass,wipe it off by cloth, dry it to film, then make polishing with a dry towel.
 
Precaution:
Application according to the instructions.
leaving the operation site and breathe fresh air if any breathing difficulties.
turn off the engine during the operation.
It is not applicable to special glasses and mirrors which has anti glare,waterproof and other functions.
If there still is adhesion on some parts after coating ,can wipe it off immediately by water.
Any towel or paper which has contacted  this product must not be used inside of the car.
Seal the lid and wash the towel and hands after use.
In case of eye contact, rinse with water immediately and go to the hospital.
Keep out of the reach of children.
Store it at a place below 40 ºC.
  Glass Coating

Features
 
  Using world-class technology strength , combined with a special fluorine ions added Super F12 super anti-wear agent .After using this product , it will form a thin layer of special coating layer on top of the front windshield , very smooth , has a strong water-repellent effect , rain on the window glass into crystal drops slip away quickly , especially in the fast lane over 38 km per hour , the splash of water drops on the window glass was immediately blown away by the wind generated by traveling,even without wipers, you can freely safe driving in the rain special effects continued for about three months , easy to operate , easy to clean.
 
Instructions:
1.Please cover closed before a good , uniform shaking.
2.Make application under good weather, using super oil film removal agent , remove the glass dust, dirt and oil film and dry it without leaving any water.
3.Spray it evenly on the surface of rearview glass,in case of splashing or dropping in on other places,wipe it off by the water immediately.
4. In case of splashing or hanging from the glass,wipe it off by cloth, dry it to film, then make polishing with a dry towel.
 
Precaution:
Application according to the instructions.
leaving the operation site and breathe fresh air if any breathing difficulties.
turn off the engine during the operation.
It is not applicable to special glasses and mirrors which has anti glare,waterproof and other functions.
If there still is adhesion on some parts after coating ,can wipe it off immediately by water.
Any towel or paper which has contacted  this product must not be used inside of the car.
Seal the lid and wash the towel and hands after use.
In case of eye contact, rinse with water immediately and go to the hospital.
Keep out of the reach of children.
Store it at a place below 40 ºC.
 

Mini Chiller

Cooling capacity 20kW-50kW

Characteristics:

1. Structure: Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

2. Compressor: Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.

3. Axial fan: External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.

4. Evaporator: High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element (option) and differential pressure switch, factory insulated with flexible close cell material

5. Condenser Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, 100% fully quality tested; sub cooling circuit to prevent freezing at the base (optional); protected with metal grill.

6. Desuperheater: High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material(optional).

7. Refrigerant circuit: Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.

8. Water circuit: Built with air vent valve, water drain connection, and female-threaded hydraulic connectors. Water pump (8kW-30kW), differential pressure switch. Expansion tank (8kW-30kW)

9. Electric panel: Compressor contactor, Compressor protection breaker, Fan motor protection breaker, Control circuit protection breaker, Phase sequence relay (only for 3-phase), Programmable microprocessor controller

10. Optional: Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed; Stainless steel covering; Remote condenser; Tube in tube heat exchanger; Water circuit electric heater.

Mini Chiller

Mini Chiller,Commercial Mini Chiller,Central Mini Chiller,Air Cooled Mini Chiller

Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl