Marine Waste Oil Solid Garbage Incinerator

Marine Sewage Treatment Plant
Marine Incinerator is an important device for the pollution prevention in various ships and offshore platforms. It can incinerate sludge oil, food Waste, rubbish containing, paper, rags, plastic and so on. This incinerator is in compliance with MARPOL73/78 Annex and RESOLUTION MEPC.76(40).
We offer three types of incinerator for option,
1) Incinerator for waste oil and solid waste
2) Incinerator for waste oil and sewage sludge
3) Multifunctional incinerator for waste oil, solid waste, sewage sludge
 And three options of sludge heating source, including electrical elements, steam coil or thermal coil.
All our incinerator can come with an approval certificate like CCS,DNV,GL,USCG,provide at least one year warranty.
Marine Incinerator is detachable structure,easy to install and maintain,large heat capacity,small volume. It has the function of fault shutdown,fault sound and light alarm. It possese the function of run and alarm signal remote transmission what is tuitable for transimission remote signal to ship centralized control equipment.
Adopt PLC controller as the control unit to realize the automatic control of waste incineration,and the incineration process don't need manual intervention.
Inclinerator uses touch screen technology and graphical interface. All functions operating with one key,and the selected program is completed automatically.
Incinerator uses digital graphics to display the system parameters and work state.
Meet the effluent standards of IMO MEPC.159(55)
SpecificationQuality Assurance and Service
1. Have a complete rigorous management, production and inspection processes to control the quality and avoid detail mistake
2. Design and produce ability
3. Rigorous inspection including incoming inspection, flaw detection etc., and double check is a must.
4. Advanced factory facility ensure
5. Response to any inquiry within 24 HRS with design or efficient solution from our engineer or tech supporter.
6. Provide professional customization service according to client's requirements
7. on time delivery, as we have rigorous production schedule and profession follow-up process
8. Moderate price and professional service

If you have any question or inquiry, please feel free to contact us for more details.
Ms Kate
Tel: +86-756-8169003
Phone: +86-13923317268
Website: www.weitongmarine.com
Other Products Photos





















 

Welding Angle Magnet

(Right) Strong magnets attract to any ferrous metal object and leave both hands free to safely work on the project. Ideal for fast setup and accurate holding for all welding jobs.

The arrow model covers 45, 90 and 135 degree welding angles
The protractor model covers 30, 45, 60, 75 and 90 degree welding angles

Though not recommended for lifting applications, each model has a pull rating of 50 pounds.

Weld clamp magnets are predominantly used to hold pieces of ferromagnetic materials in position for tack welding.
 
Tack welding is where a series of small welds are used to align pieces of metal securely before completing with a final weld.
 
   
   Wonkee Donkee says "A ferromagnetic material is a term for anything attracted by a magnetic force. To be ferromagnetic it must contain a element of iron, nickel, cobalt, or gadolinium"  
   
  Welding a bicycle frame with an arrow fixed multi angle weld clamp magnet
Weld clamp magnets can help to weld together things such as steel gates, metal stair steps and bicycle frames.
 
   
  Inside and outside corners produced by a corner fixed multi angle weld clamp magnet on a sheet of steel
They can be used to create the inside and outside corners of box section steel as they can hold metal at a variety of different angles.
 
Box section steel is a square or rectangular hollow steel box used for general fabrication and construction.
 
   
  Soldering two pieces of metal together that are held at a right angle with an arrow fixed multi angle weld clamp magnet
Weld clamp magnets can also be used to hold thin pieces of metal together at different angles to allow them to be soldered together.
 
Soldering uses a melted alloy to form a thin layer between the two pieces of metal to join them together.
 
   
  Layout work on a hexagon shaped steel structure with multiple magnetic square fixed multi angle weld clamp magnets
They can be used as supports for steel structures whilst doing layout work. Layout work is a process where reference points are marked across pieces of metal in order to create a template.
 
The template on the metal is carried out before starting to alter the steel structure in any way e.g. drilling holes into it.

Welding Magnet

Welding Magnet,Triangle Welding Magnet,Welding Angle Magnet,Arrow Shape Welding Magnet

Changzhou Edaweld Trading Company Limited , http://www.edaweld.com