Metal Material Laboratory Equipment/Compression Testing Machine

                      Metal Material Laboratory Equipment/Compression Testing Machine



 
Product Description

This series of Tensile Universal Test Instrument is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force , ect with different fixtures according to national and international standards customer required.

This machine is a kind of electric tensile tester which uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically.
 

Features of Tensile Universal Test Instrument:

1. Motor system: Panasonic servo motor +Servo driver +High precise ball screw (Taiwan).

2. Control system: a, computer control with TM2101 software; b, Back to origin automatically after the test, c, store data automatically or by manual operation. 

3. Data transmission: RS232.

4. Displacement resolution: 0.001mm.

5. Graph scale automatic optimization can make graph to display with best measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress - strain.

6. It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation, peel interval maximum, minimum and average, etc.

7. User can set parameters of product material such as length, width, thickness, radius, area and so on.

8. Languages: English.


Main Parameters of Tensile Universal Test Instrument:
 
Brief introduction of TM2101 control system

This control system is intended for tensile strength tester, compression tester, and electronic universal material tester. It is applicable for the physical parameter of many kinds of material in pulling, compressing, bending, cutting, tearing, peeling and puncturing test under strength property. It can do pulling, compressing, three points bending resistance, four points bending resistance, cutting, tearing, peeling, puncturing of finished shoes, carton compression test, foam recyclable compression, spring pulling test and other recyclable dynamic and static test.



Why choose us? 
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
 
2.Excellent After sale Service: 
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
 
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
 
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.


 
                      Metal Material Laboratory Equipment/Compression Testing Machine



 
Product Description

This series of Tensile Universal Test Instrument is widely used in wires & cables, hardware, metal, rubber, footwear, leather, apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force , ect with different fixtures according to national and international standards customer required.

This machine is a kind of electric tensile tester which uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically.
 

Features of Tensile Universal Test Instrument:

1. Motor system: Panasonic servo motor +Servo driver +High precise ball screw (Taiwan).

2. Control system: a, computer control with TM2101 software; b, Back to origin automatically after the test, c, store data automatically or by manual operation. 

3. Data transmission: RS232.

4. Displacement resolution: 0.001mm.

5. Graph scale automatic optimization can make graph to display with best measurement and can implement graphics dynamic switching in the test and has force-elongation, force- time, elongation -time, stress - strain.

6. It can save results automatically after test finished, and it is manual filing. It can display maximum force, yield strength, compressive strength, tensile strength, elongation, peel interval maximum, minimum and average, etc.

7. User can set parameters of product material such as length, width, thickness, radius, area and so on.

8. Languages: English.


Main Parameters of Tensile Universal Test Instrument:
 
Brief introduction of TM2101 control system

This control system is intended for tensile strength tester, compression tester, and electronic universal material tester. It is applicable for the physical parameter of many kinds of material in pulling, compressing, bending, cutting, tearing, peeling and puncturing test under strength property. It can do pulling, compressing, three points bending resistance, four points bending resistance, cutting, tearing, peeling, puncturing of finished shoes, carton compression test, foam recyclable compression, spring pulling test and other recyclable dynamic and static test.



Why choose us? 
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
 
2.Excellent After sale Service: 
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
 
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
 
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.


 

90 Degree Flat Top Chain Curve Unit

Conveyor Flat Top Chain,Flat Top Chain Conveyor,Flat Top Chains,90 Degree Curve Belt

Vitrans Automation Equipment Co.,Ltd , https://www.vitrans-automatic.com