Parallel Slide Valves-Round Flange Wafer Type Knife Gate Valve

Z73X Parallel Slide Valves
 

Valves Structure features
 The slurry valves all round channel design make it no sediment. Knife plate bottom sharp design blade shape, can cut off soft materials such as fiber, paper pulp and wood pulp. Good opening and closing action can improve the gate seal face, clean sealing surface adhesion, automatic removal of impurities.
2. Stainless steel gate plate to prevent seal leakage caused by corrosion.
3. Short structure save raw materials and installation space, also effectively support the strength of pipeline.
4. Four rods supports save materials and ensure the mechanics performance.
5, the guide block on the valve body make the gate right movement, squeezing block ensure effective seal.
6. Body reinforcement design increased the strength of the body.
7. Slurry valve inside can be made to V shape or triangular shape, to adapt to the fluid control requirements.
8. Slurry valves can be assemble with handwheel, manual zipper, spur gear, bevel gear, pneumatic, electric and electric hydraulic accessories.
9. Working temperature:
Soft seal (NBR) ≤80 ºC           (PTFE): - 40 ºC~180 ºC
Carbon steel: - 29 ºC - 425 ºC     stainless steel: - 40 ºC ~600 ºC
Process Pressure: 0.6, 1.0, 1.6, 1.0, 1.6MPa
 

Application:
Pulp, wood pulp, fiber, dust, chemicals sewage and slurry etc.
 

Products Features:
Compact design, small volume, light weight, cheap price, easy to installation, wear proof, anti-blocking, easy maintenance and long service time. Various motor device is selectable.

Z73X gate valve installation
Trouble shooting
 
Installation and usage
1. Before installation, must check whether the valve model meets the demand of the working conditions.
2. Teflon or rubber such soft seal type, must check confirm sealing surface and inside clean.
3. Before installation, must leave enough operating space for valve.
4. For electric valve or electric hydraulic control valve, when out of factory, the valve was debugging well. When use the first time, to prevent wrong wiring, please manually open the valve to full open or half open state, and then power on with no-load to test.
5. Air (hydraulic) control valve must ensure the valve have enough gas (hydraulic) pressure.
6. When installation, the bolts should be uniform tighten.
7. When installation, Avoid bumping the valve or screw valve components at will.
8. If the valve top seal outside, must be regular filling sealing oil.
9. In dry areas, if the valve actuator is spur gear, filling oil regularly.
 
 
Tianjin U-ideal Instrument Co., Ltd
Tel: +86 22 88971536  
Adds: No.818 Jingu road Jinnan, Tianjin China

Would you like to get more products information or order it, please call me, or click Inquiry Now to fill in the Form.
It helps you get more informations you need to trade confidently with suppliers.
Related products: Gate Valve Ball Valve Check Valve Globe Valve Butterfly Valve Knife Gate Valve

Diesel High Pressure Washer, Pressure Washer Machine,High Pressure Power Washer,High Pressure Washers,High Pressre Power Washer

Diesel fueled, portable and outfitted to obliterate dirt and surface contaminants under even the roughest conditions, Water Cannon`s hot water good engine powered Pressure Washer is one powerful piece of Pressure Washing equipment. Providing 4.0 GPM at 3200 PSI, this diesel washer can be customized to feature a General Pump brand pump or upgraded to a botuolini Pumps driven model. No matter which version is chosen, the possessors of this industrial power washer will enjoy extensive warranty coverage, including a one-year pump warranty, five-year engine warranty and five-year prorated coil 

Diesel High Pressure Washer

Diesel High Pressure Washer,Pressure Washer Machine,High Pressure Power Washer,High Pressure Washers

Zhejiang Botuolini Machinery Co.,Ltd , https://www.chinaplungerpump.com