Super Cone Rubber Fender / Marine Fender (SCN600H)

  • Model NO.: SCN600H
  • Shape: Cone Type
  • Size: 600h
  • Marine Parts: Fender, Bumper
  • Certification: BV, ISO9001, CCS, SGS
  • Transport Package: Container
  • Origin: Qingdao, China
  • Material: Rubber
  • Structure: Solid
  • Type: Inland and Coastal Boats
  • Usage: Ship Launching, Protection
  • Trademark: TIANDUN
  • Specification: SGS, BV, ISO9001, H600
Description:
L Wide range of sizes
L PIANC tested and certified
L Standard and intermediate rubber grades
L High efficiency
L Good angular performance

TD-AA cone type rubber with cone shaped rubber and frontal mount steel frame is the 3rd generation product of cell type rubber. Adopting cone rubber and full-new structure design of preposed steel structure, it is one of most excellent performance fender in that designed compress deformation rise from 52.5% to 70% if reaction force do not increase. Its emergence simplifies wharf structure and reduces the cost of quay wall construction, hence it is and ideal substitute of cell type rubber fender.

Applications:
The cone rubber fender is rarely damaged or impaired, because it never contacts the hull directly.
The utilization scope:
1). Suitable to the quays need low reaction force and high energy absorption;
2). Specially suitable to the quays require low hull pressure;
3). Suitable to oil terminal, container terminal and offshore berths;
4). Suitable to any case using super cell fenders.

Competitive Advantage:
1. The energy absorption doubles comparing with the super cell rubber fender with same spec.
2. In the case with similar reaction force and energy absorption, small size TD-AA cone type fender can substitute relative large TD-A super cell type fender.
3. In the case of oblique berthing (less than a angle of 10° ), the performance can not be reduced, which is preferred to TD-A model.
4. The frontal frame (steel frame) are installed in front of fenders, which can reduce the surface pressure against vessel hull. The surface can be limited below 25t/m2, which is suitable to large vessel especially.
5. The super high density polyethylene pads are adhered to the frontal frame, which can reduce the friction factor between hull and fender to below 0.2, and can reduce the shear (horizontal force) exerted on fenders when vessel berth, which can prolong the service life of fenders.
6. The frontal frame adopts water-tight structure with high strength and better anti-rust performance.




Rubber grade
Performance		 Rated deflection 70% Maximum deflection 72%
Reaction Force
(KN)		 Energy absorption
(KN@M)		 Reaction force
(KN)		 Energy absorption
(KN@M)
Super high reaction force (P2) 416 132 459 137
High reaction force (P1) 320 101 362 106
Standard reaction force (P0) 250 78 285 81
Low reaction force (P01) 192 61 224 65

Cutting Machine Series

UTECH Cutting Machine Series include Plasma Cutting Machine, CO2 Metal and Nonmetal Laser Cutting Machine , Fiber Laser Cutting Machine. Mainly be used for cutting metal materials, such as stainless steel, carbon steel, aluminum, etc.

1) Plasma cutting machine include Portable type, Desktop type, Gantry type, you can choose any type you`d like. With CNC plasma cutting machines, businesses can greatly increase their capabilities, offering their clients and consumers high quality, high-end results. Known for precision, efficiency and versatility, Cnc Plasma Cutting Machines are an effective solution for manufacturing businesses, and with operations of all sizes and scopes. Here, you`ll learn more about CNC burn tables and CNC cutting machines.
2) Metal and nonmetal laser cutting machine can cut metal and nonmetal materials. Nowadays acrylic and steel is the most popular material in the advertise industry. Laser Machine s can do well performance according to it. For acrylic, customers normally need engrave and cut. The best option is co2 laser engraving cutting machine. There is different power(60w-300w) and working size(600*400mm-1500*3000mm) for meeting different requirements.
3) Fiber laser cutting machine, with 600*400mm, 1300*2500mm, 1500*3000mm working area. It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries. Aviation aluminum has many advantages, such as good toughness, light weight, corrosion resistance, anti-oxidation, low density, and greatly increase the processing speed.

These kind of machine`s size and appearance can be customized.


cnc cutting machine

Cutting Machine Series

Automatic Cutting Machine,Automatic Feeding Laser Cutting Machine,Metal Cutting Machine,Nonmetal Cutting Machine

Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de