150HP Centrifugal Pump 4inch Water Sea Water Circulation Pump

High Pressure Horizontal Boiler Feed Multistage Pump




1.Multi-stage Pump Introduction:

QD, QDG series Horizontal Boiler Feed Water Pump.High Pressure Multistage Pump

Description: QD, QDG series centrifugal multistage pumps and QDL series vertical multistage centrifugal pumps are multiple single stage impeller combined together makes head high. 

They are used for pure water and liquids with concentration less than 1%, particles smaller than 0.1mm, or liquids similar to water in physico-chemical property. QD series pump's medium temperature can not exceed 80ºC, QDG series can not exceed 150ºC. Head: 76-1080m, flow rate: 3-600m3/h. 

 

We can use different materials of HT200, QT500, ZG500 stainless steel etc by different medium.

1) Easy installation and move;

2) Pump body support by anchor assure the stable structure and maximum resistance off-center and distortion caused by line load;

3) No overload design, make sure performance operate stably;

4) Adopt national standard hydraulic model make sure high operation efficiency and good anti-cavitation performance;

5) Packing seal and mechanical seal are available.   

 

2.Multistage pump range of application (pressure of inlet&outlet under 0.6MPa)

Suitalbe for mine, city Water Supply and Sewerage Engineering

Transfer watery liquid medium, without solid particle, temperature under 80°C

Suitable for boiler water feed or deliver medium similar with hot water, without solid particle, temperature below 105°C Suitable for stain steel, mine, sewage transferring process.

Transfer mine water with solid partical content under 1.5% or similar sewage, temperature under 80°C

Suitable for transferring Corrosive liquid without solid partical, temperature between -20°C~105°C

Suitable for transferring Oil and petroleum products without solid partical, temperature between -20°C~150°C, viscosity under 120cSt

Multistage pump Applications List

Air-conditioning system 
Cooling system 
Industrial cleaning 
Water treatment(Water purification) 
Aquiculture 
Fertilizing / metering system 
Environmental application 
Other special applications 

 3. Multistage pump Technical Specifications 

 

4. Multistage pump Feature

1, Easy maintenance: horizontal structure, inlet & outlet at the same level, can be installed in any position and any direction, it is very easy whatever maintenance or installation.

2, No water pollution: the keyflow passage components are made of stainless steel after stamping, which has good characteristics of light weight, clean, health, it is a perfect water pump of environmental protection, energy-saving.

3, low operating cost, the main flow passage components are made of stainless steel after stamping, smooth flow passage components, which has good characteristics of high efficiency, less loss, low rate of failure, longer service life

4, motor: the Aluminum Alloy motor has good characteristics of light weight, small volume, good heat dissipation, good appearance, longer service life, high efficiency and low noise, etc.

 

5.Advantages

Over 20 years experience in pumps

Wear resistant material

Specialized Test Equipment

Anti-rust treatment casting

 6. Multistage Pump show




FAQ 

Q1. Are you a manufacturer?
Yes, we have been in centrifugal pumps manufacturing and marketing industry over 32 years.

 
Q2. What markets do your pumps export to?
Europe, North & South America, South-East Asia, Africa, Oceanica, Middle East countries. Our overseas agent in Italy, Russia, America and Africa are gradually improving.
 
Q3. What information should I let you know if I want to get a quotation?
Please let us know the pump capacity, head, medium, operation situation, quantity, etc. As much as your provide, the precision and accurate model selection.
 
Q4. Is it available to print our own brand on the pump?
Totally acceptable as international rules.
 
Q5. How can I get the price of your pump?
You can connect with us through any of the following contact information. Our personalized service person will respond you within 24 hours.
 
Contact information



Roger Chen (Sales Manager)
    
SHIJIAZHUANG AN PUMP MACHINERY CO.,LTD.
Tel:+86 311 89940549 | Fax:+86 311 86271170 
http://www.angroupcn.com | www.waterpumpcn.com 

Welcome your inquiry about our multistage pump!

High Pressure Horizontal Boiler Feed Multistage Pump




1.Multi-stage Pump Introduction:

QD, QDG series Horizontal Boiler Feed Water Pump.High Pressure Multistage Pump

Description: QD, QDG series centrifugal multistage pumps and QDL series vertical multistage centrifugal pumps are multiple single stage impeller combined together makes head high. 

They are used for pure water and liquids with concentration less than 1%, particles smaller than 0.1mm, or liquids similar to water in physico-chemical property. QD series pump's medium temperature can not exceed 80ºC, QDG series can not exceed 150ºC. Head: 76-1080m, flow rate: 3-600m3/h. 

 

We can use different materials of HT200, QT500, ZG500 stainless steel etc by different medium.

1) Easy installation and move;

2) Pump body support by anchor assure the stable structure and maximum resistance off-center and distortion caused by line load;

3) No overload design, make sure performance operate stably;

4) Adopt national standard hydraulic model make sure high operation efficiency and good anti-cavitation performance;

5) Packing seal and mechanical seal are available.   

 

2.Multistage pump range of application (pressure of inlet&outlet under 0.6MPa)

Suitalbe for mine, city Water Supply and Sewerage Engineering

Transfer watery liquid medium, without solid particle, temperature under 80°C

Suitable for boiler water feed or deliver medium similar with hot water, without solid particle, temperature below 105°C Suitable for stain steel, mine, sewage transferring process.

Transfer mine water with solid partical content under 1.5% or similar sewage, temperature under 80°C

Suitable for transferring Corrosive liquid without solid partical, temperature between -20°C~105°C

Suitable for transferring Oil and petroleum products without solid partical, temperature between -20°C~150°C, viscosity under 120cSt

Multistage pump Applications List

Air-conditioning system 
Cooling system 
Industrial cleaning 
Water treatment(Water purification) 
Aquiculture 
Fertilizing / metering system 
Environmental application 
Other special applications 

 3. Multistage pump Technical Specifications 

 

4. Multistage pump Feature

1, Easy maintenance: horizontal structure, inlet & outlet at the same level, can be installed in any position and any direction, it is very easy whatever maintenance or installation.

2, No water pollution: the keyflow passage components are made of stainless steel after stamping, which has good characteristics of light weight, clean, health, it is a perfect water pump of environmental protection, energy-saving.

3, low operating cost, the main flow passage components are made of stainless steel after stamping, smooth flow passage components, which has good characteristics of high efficiency, less loss, low rate of failure, longer service life

4, motor: the Aluminum Alloy motor has good characteristics of light weight, small volume, good heat dissipation, good appearance, longer service life, high efficiency and low noise, etc.

 

5.Advantages

Over 20 years experience in pumps

Wear resistant material

Specialized Test Equipment

Anti-rust treatment casting

 6. Multistage Pump show




FAQ 

Q1. Are you a manufacturer?
Yes, we have been in centrifugal pumps manufacturing and marketing industry over 32 years.

 
Q2. What markets do your pumps export to?
Europe, North & South America, South-East Asia, Africa, Oceanica, Middle East countries. Our overseas agent in Italy, Russia, America and Africa are gradually improving.
 
Q3. What information should I let you know if I want to get a quotation?
Please let us know the pump capacity, head, medium, operation situation, quantity, etc. As much as your provide, the precision and accurate model selection.
 
Q4. Is it available to print our own brand on the pump?
Totally acceptable as international rules.
 
Q5. How can I get the price of your pump?
You can connect with us through any of the following contact information. Our personalized service person will respond you within 24 hours.
 
Contact information



Roger Chen (Sales Manager)
    
SHIJIAZHUANG AN PUMP MACHINERY CO.,LTD.
Tel:+86 311 89940549 | Fax:+86 311 86271170 
http://www.angroupcn.com | www.waterpumpcn.com 

Welcome your inquiry about our multistage pump!

Luhang Marine Surface Buoys are manufactured from a polyethylene or EVA thermo-laminated foam core encapsulated within self-colored polyurethane out skin. Used extensively in single point mooring (SPM) systems, the three main types of support buoy are: Cylindrical Buoys, Chain Throught Buoys, Pick-Up Buoys.

Surface Buoys

Surface Buoys, Marine Buoys, Anchor Buoys

Qingdao LuHang Marine Airbag and Fender Co., Ltd. , http://www.marinefendersystem.com