Injection Plastic Scooter Motorcycle Seat Frame Mold
1. Provide 3D design
2. Mould steel/hardness: 718 HRC34-38
3. OEM service
4. Mould life: 1, 000, 000shots
JSL Mould Quality Control
For the Q/C of mould, there are 3 steps:
1. Mould Material Q/C
- Mould Steel Checking(Hardness, flaw detection)
- Mould Standard Spare Parts Checking(hardness, size, flaw checking)
2. Mould Making Process Q/C
- design checking (part design, mould design, mould engineering drawing)
- checking each part of mould's size after machining, according to 2D drawing
- mould testing(check mould running condition)
3. Check with customer's requirement again before mould shipping.
| Product Name | Injection plastic scooter motorcycle seat frame mold |
| Product material | ABS |
| Core&Cavity Steel | 718 |
| Steel hardness: | HRC34-38 |
| Mould Standard | DME,HASCO,LKM,etc |
| Cavity Number | ONE |
| Injection System | Direct Gate |
| Ejector System | Ejector Pin |
| mould base |
S50C |
| Cycle Time |
45-50S |
| Tooling lead time | 60DAYS |
| Mould life | 1,000,000SHOTS |
| Quality assurance | ISO9001 |
| Specification | According to client's requirements |
| Â | Â |
| Our Advantage | Â Â Â Â 1.High quality |
| Â Â Â Â 2.Reasonable price | |
| Â Â Â Â 3.On time delivery | |
| Â Â Â Â 4.Good After-sale service | |
| Â Â Â Â 5.Strict quality control | |
| Â Â Â Â 6.All the mould are automotic. | |
| Â | Â |
| Offer you | In-time response on letters, telephone calls or fax |
| In-time supply the quotation and mould designs | |
| In-time communication on the technical points | |
| In-time sending pictures for the mould machining progress and mould finishing schedule | |
| In-time mould test and sample delivery | |
| In-time mould delivery. | |
| motorcycle parts plastic injection mould | |
| 1.Samples/Drawing &Requirement from you | |
| 2.Mould design:we will Communicate&Exchange the opinion with you after you place order. | |
| 3.Material Purchase:Steel cutting and Mould base tooling. | |
| 4.Assembling. | |
| 5.Inspection of mould : following and controlling the tooling processing. | |
| 6.Mould testing:We will inform you the date.Than will send the sample's inspection report&injection parameters with the sample to you! | |
| 7.Your instruction &confirmation for shipment. | |
| 8.Ready made mould before packing. | |
| Â | Â |
|
For more information please contact us. | |
Spin-On Oil Filter Element-Simple removal by spinning off and replacing the element. Manufactured of synthetic, paper, metal mesh or cloth, with a micron rating which varies based on manufacturer specifications.
The proper selection and use of compressed Air Filters will prevent many short and long term problems with your compressed air equipment and systems and save you substantialy in down-time and component replacement costs over the life of your compressed air system.
Oil Filters present the second barrier of protection. These are usually rated at 10 to 20 microns. Filter Material is also paper or synthetic, and can be surface loading or depth loading.(contaminants enter the filter media and are trapped within the depth of the media, rather than only on the surface.)
Canister(Cartridge) Oil Filter Element-This consists of an element inside a metal canister. The canister must be opened, and the new filter installed inside the cavity. This element may be a variety of materials(metal mesh, synthetic, paper, or cloth) and will be manufactured with micron ratings compatible to the OEM specifications.Sinofiltec offers branded and high quality replacement filters for all domestic and international compressor OEMs.
Compressor Oil Filters,Air Compressor Oil Filter
Henan Sinofiltec Technology Co.,Ltd , https://www.airfilters.pl