(1). Using high quality raw material
(2). The unique whole winding process
(3). The size and structure of air bag
 The normal diameter of airbag can be 0.5m-2.5m, length 5-28m, layers can be 4-12 layer.
 Other models c an also be produced according to customer requirements.
(4)Production standards
  Our products manufactured strictly according with the CB/T3795 "ship upgrading, launching airbag"  standards, factory check strictly before shipping.
(5)Use: a. Ship launchingÂSpecification of ship launching marine boat airbagÂ
Some normal sizes of our lift bags  , other sizes are also available | |||
 Diameter(m) |
Effective Length(m) |
Layer |
Pressure(MPa) |
1.0 |
10 |
5~6 |
0.07~0.10 |
1.0 |
12 |
5~6 |
0.07~0.10 |
1.0 |
15 |
5~6 |
0.07~0.10 |
1.2 |
10 |
5~6 |
0.08~0.12 |
1.2 |
12 |
5~6 |
0.08~0.12 |
1.2 |
15 |
5~6 |
0.08~0.12 |
1.5 |
12 |
5~8 |
0.08~0.16 |
1.5 |
15 |
5~8 |
0.08~0.16 |
1.5 |
18 |
5~8 |
0.08~0.16 |
1.5 |
20 |
4~8 |
0.08~0.16 |
1.5 |
24 |
5~8 |
0.08~0.16 |
1.8 |
12 |
5~8 |
0.08~0.15 |
1.8 |
15 |
5~8 |
0.08~0.15 |
1.8 |
18 |
5~8 |
0.08~0.15 |
1.8 |
20 |
5~8 |
0.08~0.15 |
1.8 |
24 |
5~8 |
0.08~0.15 |
2.0 |
18 |
6~10 |
0.08~0.18 |
2.0 |
20 |
6~10 |
0.08~0.18 |
2.0 |
24 |
6~10 |
0.08~0.18 |
2.5 |
18 |
7~10 |
0.07~0.13 |
2.5 |
20 |
7~10 |
0.07~0.13 |
2.5 |
24 |
7~10 |
0.07~0.13 |
316 Stainless Steel Cut Wire Shot
Longlived 316 stainless steel Cut Wire Shot are all produced through German craftsmanship with bright, defect-free and pollution-free material. After strict processing like heat treating, wire drawing, electronic spiral cutting, passivation molding and other processes, our products are strictly in a accordance with German Spring Association standard VDFI8001, German industrial standards DIN8201 and American Aerospace Material Specification Standard. It is widely used for surface shot blasting, sand blasting and shot blasting of stainless steel parts, aluminum alloy die castings, and copper alloy parts. According to different composition, stainless steel is classfied several grades such as 304, 410, 430, 201 and 316 stainless steel cut wire shot is the most popular abrasive of them as its excellent performance. The composition of 316 stainless steeel is: C≤0.08, Cr 16.00-18.50, Ni 10.00-14.00, Mn ≤2, P≤0.035, S≤0.030, Mo 2.00-3.00, Si≤1.00. So you can check if 316 Stainless Steel Shot could meet your requirement. Generally 316 stainless tseel cut wire shot could be classfied two kinds. One is as cut and the other is conditioned. Compared with as cut one, conditioned is without sharpe edges and corners and has near round shape. According to this, you can choose the more suitable one.
316 Stainless Steel Cut Wire Shot,Sus316 Stainless Steel Cut Wire Shot,Ss316 Stainless Steel Shot,Bulk Stainless Steel Shot
Longlived Metal Products Co ., Ltd , https://www.stainlesssteelshotcn.com