Steel Coil Lifting C Type Hook

Model NO.: SIK-CH
Power Source: Lever
Shape: C Type
Certification: GS, ISO 9001
Sling Color: Yellow
Product: Steel Coil Lifting C Type Hook
Warranty: 12 Months
Capacity: 5-40t
Application: Horizontal Coils Lifting
Types: Mechanical Type or Electrical Rotary Type
Coil Width: 300mm to 1660mm
Coil Inner Dia.: 400mm to 700mm
Inner Height: up to 1200mm
Self Weight: 500 to 3400kg
Protective Pad: Included
Trademark: SINOKO
Transport Package: Sea Worthy Packing
Specification: CE; ISO; GOST; SGS
Origin: Henan, China
HS Code: 8308100000
Steel Coil Lifting C Type Hook

Specification:
1. Load ability is from 3.2 ton to 40 ton.
2. Coil width from 300mm to 1660mm.
3. Coil inner dia. from 400mm to 700mm.

I. Introduction of Steel Coil Lifting C Type Hook:
C-hook is a simple kind of hanger of hoisting horizontal coil, reinforcing steel bar and coiled steel, etc.
Application It is applicable to high-temperature or low-temperature occasion, and protective pad can be supported to the inside of the hook.
Types 1. Mechanical type
2. Electrical rotary type

II. Technical Parameters of Steel Coil Lifting C Type Hook
Working
load		 Coil width
(mm)		 Diameter of inner coil
(mm)		 Inner width
(mm)		 Inner height
(mm)		 Self-weight
(kg)
3T 300-500 ≥400 500 450 350
5T 750-900 ≥400 900 500 450
900-1100 ≥506 1100 600 650
1100-1300 ≥506 1300 600 800
10T 750-900 ≥506 900 650 600
900-1120 ≥506 1120 850 900
1100-1300 ≥506 1300 750 1000
1300-1500 ≥506 1500 850 1200
15T 900-1100 ≥506 1100 850 1200
1100-1500 ≥506 1500 850 1600
25T 900-1100 ≥506 1100 860 1800
1100-1500 ≥506 1500 860 2500
30T 1400-1660 ≥506 1660 850 3400

III. Other Sling
Hook Types  Description
1. Crane Hook: Single hook or Double hooks
Lifting hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling chain or rope.
2. Electric Magnetic It is a lifting equipment that can be installed on the crane to handling scrapped steels. It is suitable for transferring cast ingots,steel balls and various kinds of scrapped steels.
Its excitation modes include 3 constant voltage mode,strong excitation mode and overexcitation mode.

IV. Our Sinoko Cranes
Products  China standard and European standard overhead cranes, gantry cranes, hoists and other crane related parts.
Factory more than 1500 employees, over 180 engineers and technicians, 210-plus sets of advanced manufacturing and testing equipments enable us to make high quality cranes.
Cooperation Factory cooperates with KONE Group SWF company tightly and keeps focus on European design cranes. The whole crane performance reaches international advanced level.
Warranty&  Installation 18 months warranty and providing Overseas installation. To make sure the crane can service better for the working.
Service 1. Our factory provide machine testing when customer come to our factory to see this machine.
2. We provide detail machine technical specification, electric diagram, installation book, operating manual, drawings.
3. We can provide engineers to customer's factory to help installation and training workers if customer required.
4.Spare parts is available when u need.within warranty,we will provide without any charge.Over warranty,we can provide spare parts just with factory cost.We will take response and provide technical support and repair of the whole machine lifetime.
Certificate CE, ISO and other certificate on customer's requirement.


Concrete Pile Spinning/Centrifugal Machine:

Concrete Pile Spinning/Centrifugal Machine is mainly apply to produce High strength centrifugal technology concrete spun piles of difference diameter and length, Prestressed Reinforced concrete pole(SPC pole) by spinning formed. According to customer's effeciency request, there are Single wheel spinning machine and Double wheel spinning machine at customer's option, it is equipped with a stepless speed-variation motor and a control panel, it works smoothly and its speeder is of wide-range. Its box base is sturdy and durable and easy for installation.


Our Pile Spinning Machine's Advantages:

1. Unique "slot" design, change the screw limit between the bearing support and the base plate with the card slot and bolt limit. Both up and down sides of the spinning machine panel, undersurface and two sides of bearing support go through fine machining. Though the process is complex, it makes it more solid during high-frequency vibration of bearing support and the floor. Repair and replacement also have interchangeability.

Spinning machine for concrete pile

2. Connection shaft is whole shaft, to avoid stress concentration brought by shaft diameter changes, resulting in the phenomenon of "shaft-broken".

Spinning machine for electric pole

3. The limit side of the support wheel is removable. It is convenient for users to replace.

Centrigual machine for Concrete spun pile


4. Frequency-conversion cabinet of spinning machine records process parameter of each pipe and output reports, provides the office computer data communication interface.

Spinng machine automatic controller

 

Spinning Machine Technical Parameter:

Wheel Distance(mm)

2000

Central wheel Distance(mm)

950-1200

Wheel Diameteri(mm)

600

Axle Diameter(mm)

110-125

Automatic controller for centrifugal concrete pile machine

 

 

We can Customize for you. If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.



Concrete Pile Spinning Machine

Concrete Spinning Machine,Spun Pile Centrifugal Machine,Concrete Pile Spinning Machine,Pole Spinning Machine

Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com