API 6A Good Quality Blowout Preventer

Model NO.: YBOP-2
Trademark: YOUYAO
Origin: China
HS Code: 84314310
Model NO.: YBOP-2
Trademark: YOUYAO
Origin: China
HS Code: 84314310
Ram Blowout Preventer
 
   
Brief Introduction to Ram Blowout Preventer:
The ram BOP is an integral part of well controlequipment, featuring flexible closings and openings,easy operation, safe service and simple maintenance.
1, Application
The ram BOP is designed to seal off the tubularannulus or the well. With the ram BOP in the closedposition, such operations as circulating drilling fluid, re-leasing pressure and killing the well can be performedby means of the spool beneath the BOP or pipelinesconnected to outlet of the BOP body. Under specialcircumstances, the ram BOP can shear the pipe in thehole to seal off the well. If the ram BOP has variablebore rams, it can seal off the annular space betweenthe casing and the pipes whose sizes are at the mini-mum and maximum of the ram's range.
2, Structural Features
(1) Body Structure;
1)Shape. The BOP has a body similar to squareshape, having a vertical bore through which the pipescan pass and ram cavities in which the rams move inthe horizontal direction
2)Connection types. The BOP are offered withstudded, flanged and hubbed top and bottomconnections. The sizes of flanges, Bolts, clamps andring grooves all conform to API 16A.
(2)Ram structure
For dual-face ram, the upper face and lower faceof the ram are exactly symmetrical. Various drilling toolswith different sizes is only necessary to replace the semi-annular rubber sealing ring and ram compact, the oth-ers can be interchanged;
(3)Seal of Ram
The seal of the ram putting into effect of the pack-ing wellhead must depend on four seals. i.e. the sealbetween the top of the ram and housing, the seal be-tween the fore-end of the ram and the pipeline, the sealbetween the housing and the side-gate and the sealbetween piston rod and the side-gate.
(4)Locking Mechanism of Ram
The manual locking device depends on manpower torotate handwheel to close or lock the rams. It shall benoted that the manual locking device only can be usedto close rams. Be sure to make the manual locking de-vice return to the original position to unlock the ramsbefore opening the rams with hydraulic pressure.
No. Item Quantity Material Remarks
1 Tightening Axis 4 42CrMo  
2 Cylinder Cover 4 30CrMo  
3 Medium Flange 4 25CrNiMo  
4 Piston 4 42CrMo  
5 Gate Valve 2 25CrNiMo  
6 Bolt 16 40CrNiMo  
7 Shell 1 25CrNiMo  
 
No. Item Quantity Material Remarks
1 Ram Body 1 25CrNiMo  
2 Top Sealing 1 Nitrile Rubber  
3 Front Sealing 1 Nitrile Rubber  
Technical Parameters:
Item\Type 2FZ23-35 2FZ35-21 2FZ18-35 2FZ28-35 FZ18-35 2FZ35-35
Vertical bore,mm 230 346 180 280 180 346
Working pressure,Mpa 35 21 35 35 35 35
Test pressure,Mpa 70 42 70 70 70 70
Hydraulic pressure,Mpa 8.5-14 8.5-14 8.5-14 8.5-14 8.5-14 10.5
Cylinder diameter,mm 220 220 180 220 180  
The oil demand when close ram,l 9.5 13.3 9.7 11 4.85  
The oil demand when close ram,l 8.2 11.7 8.2 9.6 4.1  
Ram size,in. Blind,27/8,31/2,41/2,5,51/2 Blind,27/8,31/2,41/2,5,51/2,7,95/8 Blind,27/8,31/2,41/2, Blind,27/8,31/2,41/2,5,7 Blind,27/8,31/2,41/2, Blind,27/8,31/2,41/2,5,51/2,7, 95/8
Diameter of bolt circle,mm 393.7 533.4 317.5 482.6 317.5 590.6
Size and guality of bolt,ea ×MM 12×M42 20×M36 12×m36 12×m48 12×m36 12×m42
Pitch diameter of ring groove,mm 269.88 381 211.14 323.85 211.14 408
Technical Parameters:
Item\Type 2FZ23-35 2FZ35-21 2FZ18-35 2FZ28-35 FZ18-35 2FZ35-35
Vertical bore,mm 230 346 180 280 180 346
Working pressure,Mpa 35 21 35 35 35 35
Test pressure,Mpa 70 42 70 70 70 70
Hydraulic pressure,Mpa 8.5-14 8.5-14 8.5-14 8.5-14 8.5-14 10.5
Cylinder diameter,mm 220 220 180 220 180  
The oil demand when close ram,l 9.5 13.3 9.7 11 4.85  
The oil demand when close ram,l 8.2 11.7 8.2 9.6 4.1  
Ram size,in. Blind,27/8,31/2,41/2,5,51/2 Blind,27/8,31/2,41/2,5,51/2,7,95/8 Blind,27/8,31/2,41/2, Blind,27/8,31/2,41/2,5,7 Blind,27/8,31/2,41/2, Blind,27/8,31/2,41/2,5,51/2,7, 95/8
Diameter of bolt circle,mm 393.7 533.4 317.5 482.6 317.5 590.6
Size and guality of bolt,ea ×MM 12×M42 20×M36 12×m36 12×m48 12×m36 12×m42
Pitch diameter of ring groove,mm 269.88 381 211.14 323.85 211.14 408
Operating Requirements:
(1)As blowout happens, full-enclosed ram BOP isable to pack off an empty well or semi-enclosed ram isable to pack off the drilling tool with the same size asthe ram. If long time of well close is necessary, the ramshould be locked up manually and a nameplate shouldbe provided for indication. The wheel is pulled to thestation prior to turned back at 1/4~1/2 circuit.
(2)Before opening rams, check whether the manual locking device is unlocked or not. Every time after open-ing rams, check whether rams are in the full open posi-tion or not in order to prevent pipes from damaging rams
(3)Release pressure in the control manifold before opening or closing the door in order to prevent damageto O-Ring of the hinge. If the door is not in the full openposition or its bolts not installed well, it is not allowed toopen or close rams with hydraulic pressure
 
we have got API approved with our license number 6A-1227, 16C-0174, so plz find the following our valves and parts in stock or under production now:

CAMERON FC EE, PSL3, PR1 valves
1-13/16 10000psi  (40pcs)
2-1/16  10000PSI  (900pcs)
2-1/16  15000PSI  (55pcs)
2-9/16  10000PSI  (60pcs)
3-1/16  10000PSI  (60pcs)
4-1/16  10000PSI  (100pcs)
4-1/16  15000PSI  (50pcs)
5-1/8   100000psi  (55pcs)
7-1/16  100000psi  (44pcs)
CAMERON FC Pneumatic VALVE EE,PSL3,PR1 
2-1/16  5000PSI  (10pcs)
2-1/16  10000PSI  (20pcs)
3-1/16  10000PSI  (10pcs)
CAMERON FC HY VALVE EE,PSL3,PR1  
2-1/16  15000PSI  (30pcs)
3-1/16  15000PSI  (20pcs)
 
CAMERON FLS VALVE,EE,PSL3,PR1
7-1/16 10000PSI BALL SCREW FLS VALVE (10pcs)
410SS+supersonic tungsten caribde gates and seats: 
1-13/16" 10000PSI              450sets
2-1/16" 10000PSI, 15000PSI     300sets
2-9/16" 10000PSI, 15000PSI     200sets
3-1/16" 10000PSI               400sets 
3-1/16" 15000PSI               100sets
4-1/16" 10000PSI               300sets
4-1/16" 15000PSI               200sets
5-1/8" 10000PSI                350sets
7-1/16" 10000PSI               300sets
CAMERON WKM  
2-1/16"   5000PSI    300SET    
3-1/8"    5000PSI    50 sets     
4-1/16"   5000psi    50sets   
7-1/16"   20sets
CAMERON DEMCO   
2"  5000PSI   40 sets    
3"  5000psi   40sets    
4"  5000psi   30sets    
5"   5000psi   50sets
                     
DEMCO  2"    7500PSI     20 sets   
3"  7500psi    15sets   
4"   7500psi   20  sets    
5"  7500psi   30 sets
UNIONS
FIG206 2" 150,  3" 100, 4"   300PCS
FIG602,1502   2" 100,  3" 150, 4"   100PCS under production
Also type of BOPS including models as following, total quantity 50sets:
21-1/4" 2k annular 
Double-ram 21 1/4" 3K 
annular 13 5/8" 5K
Double-ram 13 5/8" 10K 
Single-ram 13 5/8" 10K 
Annular-11" 10K    
D-Ram 11" 15K                   
S-ram 11" 15K   
Annular-9" 10K      
D-Ram 11" 15K                   
S-ram 9" 15K   
D-Ram 9" 15K     
Annular-7" 10K   
D-Ram 7" 15K                   
S-ram 7 " 15K   
Annular - 7 " 5K      
D-Ram 7" 10K                   
S-ram 7 " 10K   
D-Ram 7" 5K                  
S-ram 7 " 5K   

XQ140-12YA   15pcs  
XQ140-12YT   6pcs    
TQ340/35     7pcs   
ZQ127-25Y    15pcs 
XQ114-6YB    13pcs
XQ89/3YB     11pcs
HYDRAULIC POWER TONG, MODEL YD160,   3 SETS

As you can see that our production range is very wide, for any need or inquiry of the above, just contact with me freely, looking forward to start our cooperation through our mutual efforts and your further reply would be highly appreciated.
 
Ram Blowout Preventer
 
   
Brief Introduction to Ram Blowout Preventer:
The ram BOP is an integral part of well controlequipment, featuring flexible closings and openings,easy operation, safe service and simple maintenance.
1, Application
The ram BOP is designed to seal off the tubularannulus or the well. With the ram BOP in the closedposition, such operations as circulating drilling fluid, re-leasing pressure and killing the well can be performedby means of the spool beneath the BOP or pipelinesconnected to outlet of the BOP body. Under specialcircumstances, the ram BOP can shear the pipe in thehole to seal off the well. If the ram BOP has variablebore rams, it can seal off the annular space betweenthe casing and the pipes whose sizes are at the mini-mum and maximum of the ram's range.
2, Structural Features
(1) Body Structure;
1)Shape. The BOP has a body similar to squareshape, having a vertical bore through which the pipescan pass and ram cavities in which the rams move inthe horizontal direction
2)Connection types. The BOP are offered withstudded, flanged and hubbed top and bottomconnections. The sizes of flanges, bolts, clamps andring grooves all conform to API 16A.
(2)Ram structure
For dual-face ram, the upper face and lower faceof the ram are exactly symmetrical. Various drilling toolswith different sizes is only necessary to replace the semi-annular rubber sealing ring and ram compact, the oth-ers can be interchanged;
(3)Seal of Ram
The seal of the ram putting into effect of the pack-ing wellhead must depend on four seals. i.e. the sealbetween the top of the ram and housing, the seal be-tween the fore-end of the ram and the pipeline, the sealbetween the housing and the side-gate and the sealbetween piston rod and the side-gate.
(4)Locking Mechanism of Ram
The manual locking device depends on manpower torotate handwheel to close or lock the rams. It shall benoted that the manual locking device only can be usedto close rams. Be sure to make the manual locking de-vice return to the original position to unlock the ramsbefore opening the rams with hydraulic pressure.
No. Item Quantity Material Remarks
1 Tightening Axis 4 42CrMo  
2 Cylinder Cover 4 30CrMo  
3 Medium Flange 4 25CrNiMo  
4 Piston 4 42CrMo  
5 Gate Valve 2 25CrNiMo  
6 Bolt 16 40CrNiMo  
7 Shell 1 25CrNiMo  
 
No. Item Quantity Material Remarks
1 Ram Body 1 25CrNiMo  
2 Top Sealing 1 Nitrile Rubber  
3 Front Sealing 1 Nitrile Rubber  
Technical Parameters:
Item\Type 2FZ23-35 2FZ35-21 2FZ18-35 2FZ28-35 FZ18-35 2FZ35-35
Vertical bore,mm 230 346 180 280 180 346
Working pressure,Mpa 35 21 35 35 35 35
Test pressure,Mpa 70 42 70 70 70 70
Hydraulic pressure,Mpa 8.5-14 8.5-14 8.5-14 8.5-14 8.5-14 10.5
Cylinder diameter,mm 220 220 180 220 180  
The oil demand when close ram,l 9.5 13.3 9.7 11 4.85  
The oil demand when close ram,l 8.2 11.7 8.2 9.6 4.1  
Ram size,in. Blind,27/8,31/2,41/2,5,51/2 Blind,27/8,31/2,41/2,5,51/2,7,95/8 Blind,27/8,31/2,41/2, Blind,27/8,31/2,41/2,5,7 Blind,27/8,31/2,41/2, Blind,27/8,31/2,41/2,5,51/2,7, 95/8
Diameter of bolt circle,mm 393.7 533.4 317.5 482.6 317.5 590.6
Size and guality of bolt,ea ×MM 12×M42 20×M36 12×m36 12×m48 12×m36 12×m42
Pitch diameter of ring groove,mm 269.88 381 211.14 323.85 211.14 408
Technical Parameters:
Item\Type 2FZ23-35 2FZ35-21 2FZ18-35 2FZ28-35 FZ18-35 2FZ35-35
Vertical bore,mm 230 346 180 280 180 346
Working pressure,Mpa 35 21 35 35 35 35
Test pressure,Mpa 70 42 70 70 70 70
Hydraulic pressure,Mpa 8.5-14 8.5-14 8.5-14 8.5-14 8.5-14 10.5
Cylinder diameter,mm 220 220 180 220 180  
The oil demand when close ram,l 9.5 13.3 9.7 11 4.85  
The oil demand when close ram,l 8.2 11.7 8.2 9.6 4.1  
Ram size,in. Blind,27/8,31/2,41/2,5,51/2 Blind,27/8,31/2,41/2,5,51/2,7,95/8 Blind,27/8,31/2,41/2, Blind,27/8,31/2,41/2,5,7 Blind,27/8,31/2,41/2, Blind,27/8,31/2,41/2,5,51/2,7, 95/8
Diameter of bolt circle,mm 393.7 533.4 317.5 482.6 317.5 590.6
Size and guality of bolt,ea ×MM 12×M42 20×M36 12×m36 12×m48 12×m36 12×m42
Pitch diameter of ring groove,mm 269.88 381 211.14 323.85 211.14 408
Operating Requirements:
(1)As blowout happens, full-enclosed ram BOP isable to pack off an empty well or semi-enclosed ram isable to pack off the drilling tool with the same size asthe ram. If long time of well close is necessary, the ramshould be locked up manually and a nameplate shouldbe provided for indication. The wheel is pulled to thestation prior to turned back at 1/4~1/2 circuit.
(2)Before opening rams, check whether the manual locking device is unlocked or not. Every time after open-ing rams, check whether rams are in the full open posi-tion or not in order to prevent pipes from damaging rams
(3)Release pressure in the control manifold before opening or closing the door in order to prevent damageto O-Ring of the hinge. If the door is not in the full openposition or its bolts not installed well, it is not allowed toopen or close rams with hydraulic pressure
 
we have got API approved with our license number 6A-1227, 16C-0174, so plz find the following our valves and parts in stock or under production now:

CAMERON FC EE, PSL3, PR1 valves
1-13/16 10000psi  (40pcs)
2-1/16  10000PSI  (900pcs)
2-1/16  15000PSI  (55pcs)
2-9/16  10000PSI  (60pcs)
3-1/16  10000PSI  (60pcs)
4-1/16  10000PSI  (100pcs)
4-1/16  15000PSI  (50pcs)
5-1/8   100000psi  (55pcs)
7-1/16  100000psi  (44pcs)
CAMERON FC Pneumatic VALVE EE,PSL3,PR1 
2-1/16  5000PSI  (10pcs)
2-1/16  10000PSI  (20pcs)
3-1/16  10000PSI  (10pcs)
CAMERON FC HY VALVE EE,PSL3,PR1  
2-1/16  15000PSI  (30pcs)
3-1/16  15000PSI  (20pcs)
 
CAMERON FLS VALVE,EE,PSL3,PR1
7-1/16 10000PSI BALL SCREW FLS VALVE (10pcs)
410SS+supersonic tungsten caribde gates and seats: 
1-13/16" 10000PSI              450sets
2-1/16" 10000PSI, 15000PSI     300sets
2-9/16" 10000PSI, 15000PSI     200sets
3-1/16" 10000PSI               400sets 
3-1/16" 15000PSI               100sets
4-1/16" 10000PSI               300sets
4-1/16" 15000PSI               200sets
5-1/8" 10000PSI                350sets
7-1/16" 10000PSI               300sets
CAMERON WKM  
2-1/16"   5000PSI    300SET    
3-1/8"    5000PSI    50 sets     
4-1/16"   5000psi    50sets   
7-1/16"   20sets
CAMERON DEMCO   
2"  5000PSI   40 sets    
3"  5000psi   40sets    
4"  5000psi   30sets    
5"   5000psi   50sets
                     
DEMCO  2"    7500PSI     20 sets   
3"  7500psi    15sets   
4"   7500psi   20  sets    
5"  7500psi   30 sets
UNIONS
FIG206 2" 150,  3" 100, 4"   300PCS
FIG602,1502   2" 100,  3" 150, 4"   100PCS under production
Also type of BOPS including models as following, total quantity 50sets:
21-1/4" 2k annular 
Double-ram 21 1/4" 3K 
annular 13 5/8" 5K
Double-ram 13 5/8" 10K 
Single-ram 13 5/8" 10K 
Annular-11" 10K    
D-Ram 11" 15K                   
S-ram 11" 15K   
Annular-9" 10K      
D-Ram 11" 15K                   
S-ram 9" 15K   
D-Ram 9" 15K     
Annular-7" 10K   
D-Ram 7" 15K                   
S-ram 7 " 15K   
Annular - 7 " 5K      
D-Ram 7" 10K                   
S-ram 7 " 10K   
D-Ram 7" 5K                  
S-ram 7 " 5K   

XQ140-12YA   15pcs  
XQ140-12YT   6pcs    
TQ340/35     7pcs   
ZQ127-25Y    15pcs 
XQ114-6YB    13pcs
XQ89/3YB     11pcs
HYDRAULIC POWER TONG, MODEL YD160,   3 SETS

As you can see that our production range is very wide, for any need or inquiry of the above, just contact with me freely, looking forward to start our cooperation through our mutual efforts and your further reply would be highly appreciated.
 

Non-standard Precision Parts

Core pin, Ejector pin, Mold punch, Mold parts, Mold components, Plastic mold parts, Mold parts manufacturer, Non-standard Precision Parts, Stamping Die components, China Mould Components

Changsha Borun Mould Co. Ltd. , http://www.borunmouldparts.com