Working principle of mechanical seal Mechanical seal, also known as mechanical seal, is a dynamic seal for rotating shaft. The mechanical seal has reliable performance, small amount of leakage, long service life and low power consumption. It does not need regular maintenance and can be adapted to the production process automation And high temperature, low temperature, high pressure, vacuum, high speed and a variety of strong corrosive media. Containing solid particulate media and other harsh conditions of the hungry seal requirements. Mechanical seal is by one or several pairs perpendicular to the axis of the relative movement of the end face in Fluid pressure and the compensating mechanism elastic (or magnetic) to maintain the engagement and with the secondary seal to achieve the leakage seal shaft seal gear pump mechanical seal requirements, the mechanical seal and the soft packing seal as follows:
advantage:
1) Sealed, reliable, long-term operation of the seal is very stable, the amount of leakage is very small, the leak is about 1% of the soft packing seal:
2) long service life, generally up to 1 ~ 2 years or longer in oil and water medium, generally working in chemical medium for more than half a year:
3) Power consumption is small, its frictional power is only 10% ~ 50%
4) The shaft or sleeve is basically not worn:
5) long maintenance cycle. End face wear can be automatically compensated, under normal circumstances do not need regular maintenance:
6) Good shock resistance, vibration of the rotating shaft and shaft insensitivity to the seal chamber deflection:
7) wide range of applications, mechanical seals can be used for high temperature, low temperature, high pressure, vacuum, different rotation frequency, and a variety of corrosive media and abrasive media containing the seal.
Disadvantages:
1) more complex, demanding processing 2) installation and replacement is too much trouble, requiring workers to have a certain level of technology 3) incidental accidents, the handling more difficult.
High price seal before the preparatory work:
1) Check the model number of the mechanical seal. Whether the specifications meet the requirements of the design drawings, so there is no damage to the parts (especially the sealing surface and auxiliary sealing ring). Deformation, cracks and other phenomena, if defective, must be replaced or repaired 2) Check the machinery Seal the parts with the size, roughness, parallelism meets the design requirements 3) When using a small spring mechanical seal, should check the length and stiffness of the small spring is the same 4) Check the host of the amount of run-in. Technical requirements, the sealing chamber is in line with the installation of standards, the sealing end cap and the shaft is vertical, the general requirements: Shaft movement is not greater than ± 0.5mm: Shaft swing (rotating ring seal) is not greater than 0.06mm: Greater than 0.05mm: seal end cap and gasket contact plane perpendicular to the center line of the non-perpendicularity should be poor 0.03 ~ 0.05mm
5) should be kept clean, especially the rotating ring and stationary ring seal surface and auxiliary seal surface should be free of impurities. Dust. Do not answer the application of unclean not clean seal surface.
6) Do not allow the tool to hit the sealing element to prevent the seal from being damaged.
PVC Yoga Ball, gym ball base, sport balls, fitness ball, yoga ball, gym ball for sale, gym ball, jumping ball, gym ball yoga, yoga ball gym, pilates ball, best yoga ball, eco fitness ball, are pvc exercise balls toxic, ultralife, exercise ball, live smart exercise ball, organic exercise ball, best gym ball, anti burst gym ball
PVC Yoga Ball, gym ball base, sport balls, fitness ball, yoga ball, gym ball for sale, gym ball, jumping ball, gym ball yoga, yoga ball gym, pilates ball, best yoga ball, eco fitness ball, are pvc exercise balls toxic, ultralife, exercise ball
Huizhou City Melors Plastic Products Co., Limited , https://www.grandfoam.com