Boarding bridge

In the logistics industry of warehousing, the boarding bridge is one of the most important loading and unloading tools in this industry. The hydraulic lifting and landing boarding bridge can be divided into a fixed boarding bridge and a mobile boarding bridge. The fixed docking bridge is an auxiliary equipment for realizing the rapid loading and unloading of goods. Its height adjustment function enables a bridge between the truck and the warehouse, through which the forklift and other handling vehicles can directly drive into the interior of the truck for batch loading and unloading of the goods. With a single job, you can quickly load and unload your cargo. It can enable companies to reduce labor and improve work efficiency, so as to obtain greater economic benefits.

The mobile dock is a dedicated auxiliary equipment for cargo handling used in conjunction with a forklift. With it, the forklift can directly enter the car compartment from the ground for bulk loading and unloading operations. The product uses artificial hydraulic power and does not require power supply. With a single operation, cargo can be safely and quickly handled. It can enable enterprises to reduce large amounts of labor, double the efficiency of loading and unloading operations, speed up the flow of goods and obtain greater economic benefits.

 

The fixed boarding bridge is the loading and unloading auxiliary equipment together with the storage platform. The equipment is integrated with the platform. It can be adjusted according to different heights of the truck body and can also be adjusted to low height to facilitate the forklift to enter the carriage. The equipment adopts imported hydraulic pump. Stations, with rolling skirts on both sides, work more safely and improve work efficiency. Special shaped steel pipe, high-precision wear-resistant cylinder. Countertop Material: Non-slip (web) board.

Product classification: 1.Electric hydraulic boarding bridge: using hydraulic system to lift the main table and extend the extension board, running smoothly and safely. Hydraulic pumps, conduits and reservoirs are a complete assembly installed at the bottom of the worktop, away from the debris in the pit. Reliable hydraulic speed valves automatically prevent free fall of the load on the platform and on the platform in the 3" range. A wide range of optional accessories further enhance safety and ease of operation. Low maintenance requirements. 2. Manual hydraulic dock levelers: With the hand-operated hydraulic pump as power, it is easy to realize height adjustment without external power supply, and brake pads are attached to prevent the axle from shifting when loading and unloading, and the adjustable hanging chain hook can be easily matched with various trucks. Fully hydraulically driven, easy to operate and reliable, the entire length of the lip plate is connected with the platform, high strength and reliability, imported seals are used to ensure that the hydraulic system has excellent sealing performance, and the imported integral modular hydraulic station is used for sealing. Well, long service life.

Product advantages and uses: Electro-hydraulic, simple operation, height can be adjusted, large adjustment range, improve handling efficiency, save manpower. The company has frequent loading and unloading trucks, large models with different models, warehouses, stations, docks, storage and logistics bases, postal transportation, and logistics distribution. Product features: 1. Full hydraulic drive, easy operation and reliable operation. 2. The entire length of the lip plate and the platform are connected to each other for high strength and reliability. 3. Adopt imported seals to ensure that the hydraulic system has excellent sealing performance. 4. Imported modular hydraulic station with good sealing and long service life. 5. High-strength "U" beam design can guarantee high load and long-distance running without deformation. 6. The use of non-slip pattern steel plate, so that the platform has a good anti-skid performance. 7. Both sides of the caster are protected with a caster skirt to prevent accidental injury from the toes extending into the platform. 8. There is a support bar that guarantees the safety of maintenance personnel entering the internal maintenance of the boarding bridge.

The correct operation of the hydraulic boarding bridge is better maintenance. How to operate it correctly? Jinan Jinli Hydraulic Machinery Co., Ltd. briefly explained the operating steps of the hydraulic loading dock for everyone, hoping to bring more help to everyone. 1. Check the boarding bridge before use to see if there is any obvious damage such as cracks or disconnections. 2. Tighten the manual valve so that the manual valve is closed. 3. Shake the handle to raise the bridge to the height of the container. 4. Slowly reverse the car and park the container under the lip plate at the front of the dock. 5. Open the manual valve to slowly lower the dock leveler, and make the lip board more than 90% stick to the bottom of the container. 6. After confirming that the lip plate is affixed to the container, pull out the hook and hook it into the pin hole of the container, and tighten the chain to make sure that the chain does not loosen and slide out and press the brake blocks on both sides. 7. Check if the manual valve is open. Must be open when using, otherwise it will damage the boarding bridge. 8. Pay close attention to the condition of the equipment during use. If any problem occurs, stop using it immediately. 9. After use, release the hook and remove the brake block. 10. Close the manual valve, shake the handle to raise the boarding bridge, and remove the car after the boarding bridge leaves the container. 11. Open the manual valve and slowly lower the landing axle to the lowest position. 12. Take away the attachments, move the docking bridge to the parking position, and cover with a waterproof cloth to prevent rainwater and other chemical substances from corroding the docking bridge, which will affect the service life of the equipment. 13. When the outdoor temperature is lower than 0°C, antifreeze hydraulic oil needs to be replaced. 14, after the use of the relevant color strip cover

Electric Kettle

Electric Kettle

Electric Kettle are made by food grand stainless steel and Polypropylene. It helps you to have a 1.8L bottle of boiled water in 5 minutes. Type 201 Stainless stell is the main material for the electric kettle housing. sometimes called a tea kettle or teakettle, is a type of pot, typically metal, specialized for boiling water, with a lid, spout, and handle, or a small kitchen appliance of similar shape that functions in a self-contained manner. Kettles can be heated either by placing on a stove, or by their own internal electric heating element in the appliance versions.

Features:

360-degree swivel base: Great way with cordless pouring; kettle lifts off base for cord. Separate base to move kettle conveniently, 360°rotation design.The cord can be wrap neatly into the base bottom for easy storage. The concealed stainless steel heating element brings fresh hot water with no metal Taste.

Soft Handle for easy using: Comfortable stay-cool handle; brushed stainless steel finish. Cool-touch buttons and ergonomic stay-cool handle.

Large Capacity for Multiple Cups: 1.8 L large capacity, with Max. water level inside the kettle. almost 1.5x the size of most tea makers. Brew up to 6oz at once! Perfect for small gatherings & parties!

Fully Stainless Steel Faster Boils: Stainless Steel Interior cover with no plastic taste. Boils water rapidly, save more time and energy. Faster than the microwave & safer than your traditional stovetop teapot.

On/off switch with LED light.: Automatic On/Off switch makes life easier. No need standing by for hot water. It shuts down when reaches a full rolling boil. Boil-dry and overheat protection to ensure the safety use.

Time Saver & Higher Safety: 1500 watts energy efficient for quick heat-up time brings water to a boil, Fast boil, auto shut off and boil dry protection technology with three-prong plug.

Brushed stainless steel housing

Applications

Making hot water for tea brewing.

Making Coffee.

Cool milk-tea.

Steaming eggs.

Any occation if you need hot water in short time.

Any color of plastic is available to produce but in big quantity. Its

Electric Kettle,Stainless Steel Electric Kettle,Electric Boiler,Big Capacity Electric Kettle

Guangzhou Taipeng Electrical Appliances Technology CO., LTD. , https://www.taipengelectrics.com