BRY-type heat transfer oil pump structure and use

Heat transfer oil circulation pump performance range (by design point)
1, the flow of 1 500m3 / h
2, lift 10-125m;
3, the temperature -20oC-350oC; BRY-type hot oil pump <model said: BRY50-32-200A example BRY 50-32-200 ABRY said hot oil pump: pump inlet diameter (mm) 32 said: HTF circulating pump Pump outlet diameter (mm) 200 said: impeller nominal diameter (mm) A said: the first cut of the impeller diameter Description: impeller diameter in order to A, B, C said that the maximum diameter is not cut shown in Table II, BRY HTF circulation pump structure The heat pump is a single-stage cantilever structure divided into the foot support and the center support, the pump inlet for the axial suction, the outlet for the center vertical upward. The pump and drive motor are mounted on the same base with flexible couplings. The entire unit without adding cooling system. Mainly by the shell, rotor, bearings, seals and other components, the use of packing seal structure, additional temperature seal, play a supporting role in sealing. Pump and motor using three-jaw type flexible coupling connection. The design of the pump changed the structure of the traditional hot oil pump, the use of natural cooling cooling, reducing the volume of the pump, so that the structure is simple, saving running costs, safe and reliable Heat conduction oil circulation pump Scope Heat conduction oil circulation pump is in accordance with GB5662 Design and manufacture of energy-saving new products. The pump performance, reasonable structure, the use of reliable.

This article Keywords: oil pump

Thread Pipe Fittings

Stainless Pipe Fittings, Threaded Pipe Fittings, Coupling Pipe Fitting, Reducer Pipe Fittings

Cangzhou Weiheng Pipe Industry Co.,Ltd , https://www.czweiheng.com