Element name | WO 3 | Pb | Zn | Cu | Bi | Mo | S | Sn | As | Fe | Ca | P | Be | SiO 2 |
content,% | 0.564 | 4.42 | 3.38 | 0.18 | 0.146 | 0.001 | 11.88 | 0.005 | 0.05 | 15.76 | 1.41 | 0.0035 | 0.016 | 25.07 |
project | Raw ore grade, % | Concentrate grade, % | ||||||
WO 3 | Cu | Pb | Zn | WO 3 | Cu | Pb | Zn | |
Quantity | 0.364 | 0.121 | 1.791 | 1.259 | 67.91 | 22.65 | 59.09 | 46.4 |
project | Tailings grade, % | Recovery rate,% | ||||||
WO 3 | Cu | Pb | Zn | WO 3 | Cu | Pb | Zn | |
Quantity | 0.08 | 0.017 | 0.183 | 0.116 | 79.64 | 62.89 | 88.66 | 82.74 |
name | Steel ball | soda ash | Yellow medicine | Water glass | "731" Oxidized Paraffin Soap | lime |
unit | Kg/t | Kg/t | Kg/t | Kg/t | Kg/t | Kg/t |
Quantity | 1.227 | 2.905 | 0.077 | 19.29 | 0.579 | 11.75 |
Serial number | Equipment name and specifications | unit | Quantity | Serial number | Equipment name and specifications | unit | Quantity |
1 | 600×900 jaw crusher | station | 1 | 5 | Φ1500 double spiral classifier | station | 1 |
2 | 400×600 jaw crusher | station | 1 | 6 | XJK-2.8 flotation machine | groove | 25 |
3 | Φ900 standard cone crusher | station | 1 | 7 | XJK-0.35 flotation machine | groove | twenty one |
4 | Φ1500×3000 ball mill | station | 1 | 8 | F15 flotation machine | groove | twenty four |
Newtec Serise ACM Mill
Newtec has been designed and manufactured as an optimized standard machine in both technical and finacial point of view.
Advantage:
36 months no question quarantee.
Free installation(no cost for internation flight, accommodation or Yuanli's staff salary)
Saftety as the first concern, considered to pass all safety retulation, to ensure safe operation. This safety has considered in all mechanical and electrical design.
CE standard applied in all parts of this machine.
-Spare Parts Replacement and Repair Service Provided
Credit for spare parts, 10% of total value of products would be credited for urgent supply of spare parts.
Formulation Provided (our advantage):
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.
We can supply all Powder Coating Raw Materials( polyester resin, epoxy resin, barium sulfate, gloss agent and so on) in the formulation.
Low Noise Powder Coating Acm Mill,Grinding Milling Machine,.Powder Coating Milling Machine,Acm Grinder Equipment
Yantai Yuanli Corp Ltd , https://www.yuanlicorpcn.com