Stripping Usage Semi-Automatic Coaxial Cable Wire Stripping Stripper Machine (WG-4806D)
Coaxial Wire Stripping Machine WG-4806D is mainly used to process hard coaxial wire and specific single wire, it adopts the most advanced four-blade and four-point centering slice based on WG-4806S, improved the processing precision and capability of wire. Nine layers can be stripped at most and no need to change the cutting blades, then it is feasible to process many kinds of sheath wire with different size, and it can set the controller with free-combination, through digital to display the diameter of wire cutting.
 SEMI-AUTOMATIC COAXIAL WIRE STRIPPING MACHINE WG-4806D Functional characteristics:
Coaxial Wire Stripping Machine WG-4806D is mainly used to process hard coaxial wire and specific single wire, it adopts the most advanced four-blade and four-point centering slice based on WG-4806S, improved the processing precision and capability of wire. Nine layers can be stripped at most and no need to change the cutting blades, then it is feasible to process many kinds of sheath wire with different size, and it can set the controller with free-combination, through digital to display the diameter of wire cutting.
Â
The structure Steel Pipe has hot - rolled seamless steel tube and welded steel tube.The seamless steel tube for structure is divided into two types according to the provisions of "seamless steel tube for structure" (GB/ t8162-2008) : hot rolling (extrusion, expansion) and cold drawing (rolling).The outer diameter of hot-rolled steel pipe is 32-630mm and the wall thickness is 2.5-75mm. The outer diameter of cold-drawn steel pipe is 5-200mm and the wall thickness is 2.5-12mm. Welded steel pipe is made of Steel Plate or steel strip after crimping and forming, which can be divided into straight welded steel pipe and spiral welded steel pipe.The outer diameter and wall thickness of the direct-welded steel pipe are 5-508mm and 0.5-12.7mm respectively, which shall comply with the provisions of GB/ t3793-2008.The welded steel pipe for low-pressure fluid transportation is also called common welded pipe, commonly known as clark pipe. The specification is expressed in mm of nominal diameter, which should comply with the provisions of GB/ t3091-2008 for low-pressure fluid transportation.
Structural Steel Tube,Carbon Structural Tube,Api 5L Steel Pipe
Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com