Shaanxi Automobile Delong new M3000 "replacement" returned, performance once again lead the industry


As we all know, Delong new M3000 tractor is the leader of similar products in the industry, and has always become the industry benchmark in terms of product comfort, reliability and power matching. Now the Delong new M3000 model is equipped with Weichai's new generation WP10H engine, and the “replacement” returns, and the product performance once again leads the industry.

The test drive's new M3000 tractor power chain uses Weichai WP10H375 horsepower engine + Fast 12JSD180TA aluminum shell overspeed gearbox +3.7 speed ratio Hande lightweight rear axle combination, specially designed for coal transportation conditions Good power matching.

The WP10H engine powered by Delong's new M3000 is a new generation diesel engine developed by Weichai. It has a bore diameter of 116 mm, a piston stroke of 150 mm, a displacement of 9.5 liters and a power of 375 hp. The maximum torque speed range is 1000-1400 rpm, and the maximum torque of 1900 Nm can be output in this speed range, and the fuel consumption rate is 185 g per kWh. The whole machine adopts high reliability design, and the life of B10 has reached an astonishing 1.8 million kilometers / 30,000 working hours.

After the "replacement of the core" Delong new M3000 exactly how to surpass, let the author lead everyone to experience the benchmark quality.

First: quiet driving

The first impression brought to the author is that the driving space is very quiet. During the test drive, the normal conversation of the reporter with the hands-free function is basically unaffected. This is mainly due to the excellent sealed sound insulation performance of the new M3000 cab and the WP10H engine. The leading vibration isolation and noise reduction technology makes the driving inside the truck cab feel comfortable.

Second, full of power

In order to let everyone experience the feeling of the extreme power of the whole vehicle, we use the method of deceleration without downshifting, forcibly reduce the engine speed to about 850 rpm, and then directly step on the throttle to test the acceleration of the engine from the "drag" state to the maximum torque speed range. performance. After testing, it accelerates instantaneously under the towed state. With only a brief slight vibration, the speed can be quickly increased. The maximum torque range of 1000-1400 rpm can fully meet the needs of complex working conditions. The transmission system of multi-speed gearbox and high-efficiency single-stage drive axle of the whole vehicle can fully exert the maximum torque of 1900 Nm.

Third, safety brake

The new M3000-matched WP10H comes standard with a compression-release engine brake with a braking power of 336 hp and does not require an exhaust butterfly valve. After the test drive test, the braking effect is really obvious. When the engine brake is turned on at the highest speed, you can feel a strong drag. For trucks with heavy-duty mountain sections, the rational use of engine braking can effectively reduce the trial frequency of service brakes, which is safe, worry-free and saves money.

Fourth, easy fuel saving

The new M3000 cab and diversion device can effectively reduce wind resistance, while the WP10H's wide economic speed zone + multi-speed gearbox + small speed ratio drive axle allows the vehicle to operate in the "green zone" at all times to achieve easy fuel economy and no load. When the state vehicle is running at 85km/h, the instantaneous fuel consumption on the new M3000 meter shows that the instantaneous fuel consumption of the meter can be stabilized at 14 liters per 100 kilometers when the engine is running at 1200 rpm and 12 stops. This fuel consumption is quite ideal for tractors that are driving at no load.

Edited

After the actual driving experience, we can easily find that the Delong new M3000 is equipped with the WP10H engine to make the performance of the product reasonably matched, and the performance of the whole vehicle is more fully utilized. Whether it is quiet space, abundant power, or safety, there are competing products. Excellent performance. The quality of the benchmark is superb, and the Delong new M3000 "replacement" is back, you deserve it.


About the prossce of the Car Valve Seat 

Harden process for Valve Seat's face : 1. High frequency quenching 2. High alloy welding

Harden process for valve seat : 1. HVOF

Seat

The function of the valve seat is 1. connecting the inlet and outlet pipes of the valve; 2. forming a valve chamber to complete the guiding of the fluid in the valve;

Car Valve Seat

Car Valve Seat,Engine Spare Parts Valve Seat,Valve Seat Tool,Valve Seat Inserts

Hebei Zhonghai Shipping Accessories Manufacturing Co., Ltd. , https://www.zhonghaiship.com