(1) Check the molybdenum wire for jitter when the molybdenum wire is gone.
(2) Whether the surface of the conductive block has a cutting mark or not, and whether the molybdenum wire is trapped in the conductive block.
(3) Whether the working fluid flow and color is normal.
(4) Before processing, the process needs to simulate. Determine whether the cutting program generated by the system is correct.
(5) According to the characteristics of the material, the last cut off of the work remains as long as possible to reduce the effect of material deformation.
(6) Several problems with the work surface after cutting:
1 The surface of the wire is traced, which may be caused by the jitter of the wire or the deformation of the material and the improper setting of the offset.
2 The black spots on both sides of the work surface are serious and the working fluid is problematic. It is recommended to try the BM-4 Water Baseline cutting fluid.
3 After cutting the workpiece, please wash with oxalic acid in time, then rinse with water to remove oxalic acid residue. Wipe the water with a clean white cloth and apply anti-rust oil.
Pet Food Machine
Product categories of Pet Food Machine, the line produce variety shapes Pet snacks, different shapes are made by adjusting the dies from extruder
we are specialized manufacturers with 15 years of extruder experience, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Dog Food Making Machine,Cat Food Machine,Pet Food Making Machine,Pet Food Extruder Machine
Jinan Chenyang Technology Co., Ltd. , https://www.cysnackextruder.com