Excellent Industrial Desiccant Lgr Dehumidifier
| Apply to lithium battery,food,pharma,medical equipment,the co-piece glass, electronics assembly, biochemistry, battery factory, food,rubber tires, etc. Temperature: 5 ~ 25 °C. Relative humidity: 1 ~ 30% RH, dew point -60 °C d p. Air volume: 300 ~ 150000m3 / h. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Industrial sensor dehumidifier large capacity | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Specification | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Selection method: excellent industrial desiccant lgr dehumidifier 1.Temperature and humidity requirements. 2.Length, width and height. 3.Air flow, ventilation rate, supply air temperature. 4.Purification level. 5.The number of staff. 6.Whether cold water and steam available.  |
Â
Brief Introduction:
Three-drum dryer is also called three-cylinder dryer and triple-Drum Dryer. It has improved internal structure of monocular dryer, which prolongs the time of pre-drying of wet materials and wet materials in the machine, thus improving 50% to 80% of production capacity compared with original monocular dryer.
Features:
1. The needed investment is only 1/6 of foreign import product.
2. The final moisture of the materials is ensured to be below 0.5%, making it the first choice of dry-mixed mortar and slag powder production line.
3. The self heat preservation heat efficiency of the cylinder can reach as high as over 70%, thus improving the heat efficiency by 35%.
4. The fuel can be coal, gas and oil, and it can be used for drying lump, granulous and powdery materials whose granularity is below 20mm.
5. Compared with monocular dryer machine, its floor space is reduced by about 50%, infrastructure investment reduced by about 50% and electricity consumption reduced by 60%.
6. The needed final water content index can be easily regulated according to customers` requirement.
7. The temperature of the air out is low and the service life of the dust removing equipment is long.
8. It needs no rack wheel and pinion driving, but uses riding wheel for transmission.
Technical Parameters:
Item/Unit/Model 1: Φ2.5×7m
Diameter of outer cylinder (m): 2.5
Length of outer cylinder (m): 7
Cylinder volume (m³ ): 16.63
Rotating speed of cylinder (rpm): 4-10
Initial moisture of slag (%): 10-12
Final moisture of slag (%): 1
Initial moisture of yellow ground (%): 8-10
Final moisture of yellow ground (%): 0.5-1
Highest intake air temperature (℃): 700-750
Production capacity (T/h): Yellow sand 25-30, Slag 20-25
Motor type: Y2-132m-4E
Motor power (kw): 7.5×2
Reducer type: XWD7-23-11W
Velocity ratio of reducer: 29
Item/Unit/Model 2: Φ2.7×7m
Diameter of outer cylinder (m): 2.7
Length of outer cylinder (m): 7
Cylinder volume (m³ ): 16.63
Rotating speed of cylinder (rpm): 4-10
Initial moisture of slag (%): 10-12
Final moisture of slag (%): 1
Initial moisture of yellow ground (%): 8-10
Final moisture of yellow ground (%): 0.5-1
Highest intake air temperature (℃): 700-750
Production capacity (T/h): Yellow sand 30-35, Slag 25-30
Motor type: Y2-132m-4E
Motor power (kw): 11×2
Reducer type: XWD7-23-11W
Velocity ratio of reducer: 29
Item/Unit/Model 3: Φ3.0×7.0m
Diameter of outer cylinder (m): 3
Length of outer cylinder (m): 7
Cylinder volume (m³ ): 52.678
Rotating speed of cylinder (rpm): 4-10
Initial moisture of slag (%): 10-12
Final moisture of slag (%): 1
Initial moisture of yellow ground (%): 8-10
Final moisture of yellow ground (%): 0.5-1
Highest intake air temperature (℃): 700-750
Production capacity (T/h): Yellow sand 35-40, Slag 30-35
Motor type: Y2-160m-4
Motor power (kw): 7.5×4
Reducer type: XWD6-23-7.5W
Velocity ratio of reducer: 29
Item/Unit/Model 4: Φ3.2×7.0m
Diameter of outer cylinder (m): 3.2
Length of outer cylinder (m): 7
Cylinder volume (m³ ): 52.678
Rotating speed of cylinder (rpm): 4-10
Initial moisture of slag (%): 10-12
Final moisture of slag (%): 1
Initial moisture of yellow ground (%): 8-10
Final moisture of yellow ground (%): 0.5-1
Highest intake air temperature (℃): 700-750
Production capacity (T/h): Yellow sand 45-50, Slag 35-40
Motor type: Y2-160m-4
Motor power (kw): 7.5×4
Reducer type: XWD6-23-7.5W
Velocity ratio of reducer: 29
Item/Unit/Model 5: Φ3.6×8m
Diameter of outer cylinder (m): 3.6
Length of outer cylinder (m): 8
Cylinder volume (m³ ): 81.37
Rotating speed of cylinder (rpm): 4-10
Initial moisture of slag (%): 10-12
Final moisture of slag (%): 1
Initial moisture of yellow ground (%): 8-10
Final moisture of yellow ground (%): 0.5-1
Highest intake air temperature (℃): 700-750
Production capacity (T/h): Yellow sand 65-70, Slag 60-65
Motor type: Y2-160m-4
Motor power (kw): 15×4
Reducer type: XWD8-23-15W
Velocity ratio of reducer: 29
Three Drum Dryer,Drum Dryer,Three Cylinder Dryer,Three Cylinder Rotary Dryer
Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co.,Ltd. , http://www.zonedingmac.com