Ship Fender for Dock Protection

  • Model NO.: XC20140410N003
  • Color: Black: Name: Rubber Fender
  • Payment: T/T L/C: Certificate: CCS CCC ISO9001, 2000
  • Marine Parts: Hinge
  • Certification: BV, CCS
  • Specification: ISO 17357 CCS ISO9001 2000
  • HS Code: 4016999000
  • Material: Natural Rubber
  • Raw Material: Natural Rubber: Diameter Range: According to Request
  • Accessories: Chains and Tyres
  • Usage: Ship Closed Dock
  • Trademark: Qingdao XinCheng
  • Origin: Qingdao
Pneumatic rubber fender is the advanced anti-collision device for marine application in the world. It is made of synthetic nylon lines and compressed rubber sheet. With inner compressed air, it can float on the water and widely used as protecting medium. It is usually used as an important protecting medium to prevent a collision in craft works and mooring works.
 
Ship Fender for Dock Protection
Advantage and application:
Compared with traditional bumper-style rubber fender, it has the following features, absorbing greater impact, less reverse impact on the ships, easy installation, more elasticity, not being bent out of shape under pressure, less weigh and practical and economical. So pneumatic fender has widespread application on oil tankers, container vessels, luxury yachts, ocean platforms, larges shipyards, military ports and larger underwater foundations of bridges, etc.
Ship Fender for Dock Protection

Purpose
1. Installed in the terminal and dock, used the ship shore and landing.
2. Installed in the ship board, used the ship close to ship.
3. Can as float rod on the sea.
4. Can used carry goods on the sea
5. Used airproof pipe

Specifications:
1. Small-scale Diameter: Less than 1meter; Length: Less than 1.5meter
2. Medium Diameter: More than 1meter, Less than2meter; Length: More than 1.5meter, Less than 4 meter.
3. Large-scale Diameter: More than 2.5 meter; Length: Length basis customers' requirement

Since we own a professional technicians team, so the most advantage is that we can suggest you the most suitable quantity of airbags needed according to the actual condition of the ships and structures, which can avoid wasting the labor, cost and time. Our mission is provide world class goods to customer, so we guarantees high standards and performances of all products. Customer requirements are strictly followed during all production phases.

Storage of pneumatic rubber fender
1. When not using for a long time wash the fender surface, dry up and fill in sufficient right of compressed air to lay in a cool dry and well-ventilated place
2. The storage place of pneumatic rubber fender should be far away form heat source
3. Try to keep fender away from acid alkali grease and organic solvents.

A tube tire will be stored in the inner tube of air, does not require precise contact between the tire and the rim. Even if the air pressure is low, do not worry about the tire will fall off the wheel, leading to leaks. Therefore, a tube tire is widely used in the use of rim and wire off-road vehicles and American cars.

Tubeless tires, which are often referred to as vacuum tires, are based on the special construction of the rim and the rim of the tire to seal the air inside the carcass. Even if this tire stabbed by foreign body, the air will not disappear immediately, and puncture repair is also very convenient, so loved by the Friends of the friction. In recent years, vacuum tires have also been gradually used in ordinary motorcycles.

Tire exhibition design

Auto Maintenance Equipment Exhibition

Auto Maintenance Equipment Exhibition,Motorcycle Tire Exhibition,Solid Forklift Tires,Solid Pneumatic Tires

China (Guangrao)International Rubber Tire & Auto Accessory Exhibition Committee , http://www.chinagrtire.com