Supply Heating Mixing Machine with Vacuum Stirring/Hydraulic Cover
Â
Description
The mixing tube structure of mixer machine is unique. It is made up of stainless materials. Both inside and outside walls are polished. There is no internal transmission mechanism inside mixing equipment and it meets the GMP standard.
Â
Application
is widely used in pharmaceutical, chemical and food industries. It is suited for mixing more than two dry powder or granular materials.
Â
Features
1. Â Â Â mixer machine features beautiful shape, uniform mixing and wide application.
2.      In accordance with the user's requirements, we can supply compulsory mixer for the powder and lump materials.
3.      Stirring device can be added into mixing equipment to break easy-caking materials and further strengthens the mixing effect.
Â
Parameters of Mixer Machine
| Model & specification | HHJD-0.18 | HHJD-0.3 | HHJD-0.5 | HHJD-1.0 | HHJD-1.5 | HHJD-2.0 | HHJD-2.5 | HHJD-3.0 | HHJD-4.0 | HHJD-5.0 | HHJD-6 |
| Productive capacity (kg/time) | 72 | 120 | 200 | 400 | 600 | 800 | 1000 | 1200 | 1600 | 2000 | 2400 |
| Model of vacuum pump | W2 | W2 | W2 | W3 | W3 | W3 | W3 | W4 | W4 | W4 | W4 |
| Feeding time (min) | 3-5 | 3-5 | 4-6 | 6-9 | 6-10 | 8-13 | 8-15 | 8-12 | 10-15 | 15-20 | 18-25 |
| Mixing time (min) | 4-8 | 6-10 | 6-10 | 6-10 | 6-10 | 6-10 | 6-10 | 8-12 | 8-12 | 8-12 | 8-12 |
| Total volume (m3) | 0.18 | 0.3 | 0.5 | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 4.0 | 5.0 | 6.0 |
| Stirring speed (r/min) | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 10 | 10 | 10 | 10 |
| Power of motor (kw) | 1.1 | 1.1 | 2.2 | 4 | 4 | 5 | 7.5 | 7.5 | 11 | 15 | 18.5 |
| Rotating height (mm) | 1580 | 1760 | 2400 | 2840 | 3010 | 3240 | 3680 | 3700 | 4350 | 4800 | 5300 |
| Weight (kg) | 280 | 320 | 550 | 950 | 1020 | 1600 | 2040 | 2300 | 2800 | 3250 | 3850 |
Pls contact us if u are insterested in our machines , 0086-13602719077
The Cyclone Dust Collector is composed of an air inlet pipe, an exhaust pipe, cylinder, cone and ash composition. It is widely used to separate solids and liquid particles from airstreams or separate solid particles from liquids. Under normal operation conditions, the influence of centrifugal force on particles is 5~2500 times that of gravity. Therefore, the efficiency of cyclone dust removal is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with a dust removal efficiency up to 90% has been successfully developed. Cyclone separator is one of the most effective dust remover in mechanical dust remover. It is suitable for the removal of non sticky and non fibrous dust, most of which are used for removal of particles above 5 mu m, and 80 ~ 85% of the dust removal efficiency of parallel multi tube cyclone dust remover is 3 micron of high temperature resistance. The corrosion and wear whirlwind produced in special metal or structural ceramic materials can be high at a temperature of 1000 degrees C, at a temperature of 1000. Under operating conditions, the pressure of 500 * 105 Pa. In terms of technology and economy, the control range of pressure loss for cyclone dust collector is generally 500 ~ 2000Pa. Therefore, it belongs to the middle effect duster, which can be used for purifying high temperature flue gas. It is a widely used dust collector for boiler flue gas dedusting, multistage dust removal and pre dusting.
Cyclone Dust Collector Series,Cyclone Dust Collector,Customized Cyclone Dust Collector,Centrifugal Cyclone Dust Remover
Botou Hengrui Environmental Protection Equipment Co. Ltd. , http://www.hrhb126.com