What can we do for the blue sky? What are the reminders for car owners?
Recently, the hot topics of the network are full of haze, all kinds of Tucao, promotion and overwhelming, as a rich and self-willed little i also joined. In the beginning, Xiao Yi planned to do so. The fog was hazy. Then we drove fewer buses and started from me. However, Pharaoh said next door that there was a car at home and you weren’t stupid. It makes sense to say that I have no words to refute...
So Xiaoyi intends to open a small-displacement vehicle. Next to the old Liu, he added that some small-displacement vehicles have low technology inputs and are also hazy producers. It is reasonable to say that I still have no words to refute...
In the end, Xiaoyi intends to develop good driving habits and try his best to reduce the fuel consumption and exhaust emissions so as to make driving trips more environmentally friendly.
  Energy Saving and Emission Reduction Start from Reducing Fuel Consumption
  1, normal tire pressure can save 3%
According to statistics, a tire with 40KPa less will reduce the life of 10,000 kilometers. If the tire pressure is reduced by 30%, the fuel consumption of the car will increase by 5%-10% when the car is driven at a speed of 40 kilometers per hour. If you meet the manufacturer's tire pressure, you can reduce fuel consumption by approximately 3.3%. Therefore, to ensure that the tire pressure is correct, regularly check the steering wheel and the tire alignment, do not change the size of the tire.
2. Lightweight vehicle can save fuel 2%
Many owners are not accustomed to picking up things and pile up all kinds of sundries in the trunk. These sundries not only occupy space, but accumulate less and increase the burden on vehicles. According to calculations by relevant departments, every 45 kilograms added will increase the fuel consumption of the car by about 2%. The vehicle will be loaded with people. Excessive load will increase fuel consumption. Therefore, regular cleaning of unnecessary items is required. Unnecessary loads can reduce fuel consumption.
Energy conservation and emission reduction start from the use of oil
  1, timely replacement of oil, machine filter
Some owners believe that choosing low-grade lubricants is not a problem for vehicles and they are cheap. The sense of responsibility for environmental protection is relatively weak. In fact, it causes serious damage to the vehicles themselves and also increases the total amount of pollutants discharged. Therefore, the main vehicle regularly checks the engine oil and replaces the engine oil on time, preferably full synthetic engine oil. In addition, the machine filter must be replaced to ensure that the oil path is smooth and free of impurities.
2, regular replacement of lubricants
Automotive lubricants are exposed to high temperatures, air and metal catalysis during long-term use. Oils will oxidize and age, affecting the normal operation of the engine. Failure to change them on time will not only reduce wear resistance, but also affect lubricants. Using performance, indirectly increase fuel consumption.
Energy-saving emission reduction starts with the habit of using cars
  1. Planned travel
If your travel distance is closer, try to use public transport or biking and walking. This will not only promote the effective use of resources and reduce the traffic volume on the road. More importantly, the quality of the harmful substances emitted from short-distance exhaust emissions is high. Some people may be puzzled. It can be understood that idling and idling will release more harmful substances. Isn't the difference between short-distance travel and long-distance travel? In fact, this is very easy to understand, the driver went downstairs hot car, driving, parking, 5 minutes to complete. Why didn't you think about getting off the train? When the engine is running, the driving process is basically over and the operating temperature has not yet been reached. In this case, how can the combustion of gasoline be better?
2, rational use of air conditioning
The air conditioners and other electrical appliances in the car consume a lot of fuel. The air conditioning should be turned on moderately. In the city, low speed driving can be used to shut down the air conditioners to open windows for ventilation. However, remember to close the windows when driving at high speeds. When the speed reaches 70 km/h, open the windows. The subsequent consumption of wind resistance will increase fuel consumption by about 1 litre per 100 kilometers.
3, driving at constant speed
The rapid acceleration and emergency stop in driving are really cool and imposing, but the cost is that the fuel consumption is increased by 2~3 times than that of constant speed, and 0.4g of extra carbon dioxide emissions will be generated per kilometer. The best "economic speed" for a typical car is 60 to 90 kilometers per hour. On the highway, the average speed of a typical car should not exceed 100 km/h.
4, idle idle no more than 30 seconds
Driving in the city, waiting for traffic lights is normal. But you need to know that after waiting for more than 30 seconds, the car is idle and idling. Idling at idle speed not only consumes oil, but also causes damage to the engine. If the engine is idling without refueling, it is easy to wear, and the exhaust gas discharged during this process is not fully burned because of uneven mixing. The harmful substances discharged in the exhaust gas are several times higher than the normal exhaust gas. If you wait for the traffic lights for a long time, please turn off as much as possible.
5, the tank is not full of oil
If you fill up the fuel tank, there is no air in it, and if you stop in the sun and dry it, it's gasoline from the vent! This is why some old cars will have gasoline on the ground in the right rear wheel. And when the oil is full, the body will be heavier and the car will run harder. Therefore, those who cherish the car, when the oil level indicator is reduced to 1/4, they will go for refueling and add it to the tank about 1/5 empty instead of filling it up.
So Xiaoyi intends to open a small-displacement vehicle. Next to the old Liu, he added that some small-displacement vehicles have low technology inputs and are also hazy producers. It is reasonable to say that I still have no words to refute...
In the end, Xiaoyi intends to develop good driving habits and try his best to reduce the fuel consumption and exhaust emissions so as to make driving trips more environmentally friendly.
  Energy Saving and Emission Reduction Start from Reducing Fuel Consumption
According to statistics, a tire with 40KPa less will reduce the life of 10,000 kilometers. If the tire pressure is reduced by 30%, the fuel consumption of the car will increase by 5%-10% when the car is driven at a speed of 40 kilometers per hour. If you meet the manufacturer's tire pressure, you can reduce fuel consumption by approximately 3.3%. Therefore, to ensure that the tire pressure is correct, regularly check the steering wheel and the tire alignment, do not change the size of the tire.
2. Lightweight vehicle can save fuel 2%
Many owners are not accustomed to picking up things and pile up all kinds of sundries in the trunk. These sundries not only occupy space, but accumulate less and increase the burden on vehicles. According to calculations by relevant departments, every 45 kilograms added will increase the fuel consumption of the car by about 2%. The vehicle will be loaded with people. Excessive load will increase fuel consumption. Therefore, regular cleaning of unnecessary items is required. Unnecessary loads can reduce fuel consumption.
Energy conservation and emission reduction start from the use of oil
  1, timely replacement of oil, machine filter
Some owners believe that choosing low-grade lubricants is not a problem for vehicles and they are cheap. The sense of responsibility for environmental protection is relatively weak. In fact, it causes serious damage to the vehicles themselves and also increases the total amount of pollutants discharged. Therefore, the main vehicle regularly checks the engine oil and replaces the engine oil on time, preferably full synthetic engine oil. In addition, the machine filter must be replaced to ensure that the oil path is smooth and free of impurities.
2, regular replacement of lubricants
Automotive lubricants are exposed to high temperatures, air and metal catalysis during long-term use. Oils will oxidize and age, affecting the normal operation of the engine. Failure to change them on time will not only reduce wear resistance, but also affect lubricants. Using performance, indirectly increase fuel consumption.
Energy-saving emission reduction starts with the habit of using cars
If your travel distance is closer, try to use public transport or biking and walking. This will not only promote the effective use of resources and reduce the traffic volume on the road. More importantly, the quality of the harmful substances emitted from short-distance exhaust emissions is high. Some people may be puzzled. It can be understood that idling and idling will release more harmful substances. Isn't the difference between short-distance travel and long-distance travel? In fact, this is very easy to understand, the driver went downstairs hot car, driving, parking, 5 minutes to complete. Why didn't you think about getting off the train? When the engine is running, the driving process is basically over and the operating temperature has not yet been reached. In this case, how can the combustion of gasoline be better?
2, rational use of air conditioning
The air conditioners and other electrical appliances in the car consume a lot of fuel. The air conditioning should be turned on moderately. In the city, low speed driving can be used to shut down the air conditioners to open windows for ventilation. However, remember to close the windows when driving at high speeds. When the speed reaches 70 km/h, open the windows. The subsequent consumption of wind resistance will increase fuel consumption by about 1 litre per 100 kilometers.
3, driving at constant speed
The rapid acceleration and emergency stop in driving are really cool and imposing, but the cost is that the fuel consumption is increased by 2~3 times than that of constant speed, and 0.4g of extra carbon dioxide emissions will be generated per kilometer. The best "economic speed" for a typical car is 60 to 90 kilometers per hour. On the highway, the average speed of a typical car should not exceed 100 km/h.
4, idle idle no more than 30 seconds
Driving in the city, waiting for traffic lights is normal. But you need to know that after waiting for more than 30 seconds, the car is idle and idling. Idling at idle speed not only consumes oil, but also causes damage to the engine. If the engine is idling without refueling, it is easy to wear, and the exhaust gas discharged during this process is not fully burned because of uneven mixing. The harmful substances discharged in the exhaust gas are several times higher than the normal exhaust gas. If you wait for the traffic lights for a long time, please turn off as much as possible.
5, the tank is not full of oil
If you fill up the fuel tank, there is no air in it, and if you stop in the sun and dry it, it's gasoline from the vent! This is why some old cars will have gasoline on the ground in the right rear wheel. And when the oil is full, the body will be heavier and the car will run harder. Therefore, those who cherish the car, when the oil level indicator is reduced to 1/4, they will go for refueling and add it to the tank about 1/5 empty instead of filling it up.
Plastic Recycling washing plants are complete production line designed for customers` needs. All the key machines are connected as per the processing procedures such as Sorting,size reudction,Washing,Drying will be all finished step by step. For different recycled plastic types, We have some standard plants for option, meanwhile,We designed slightly different for each set of machinery in the line as per customers` specified needs.
Plastic Washing Recycling Machine
Plastic Washing Recycling Machine,Plastic Flakes Hot Washing Machine,Plastic Bottle Recycling Washing Machine
Suzhou Beakeland Machinery Co., Ltd. , http://www.beakelandpm.com