It is mainly used for the flow measurement of medium fluids in industrial pipelines, such as gases, liquids, steam, and other media. Its characteristics are low pressure loss, large range, high precision, and almost no influence of parameters such as fluid density, pressure, temperature, and viscosity when measuring volume flow. No moving mechanical parts, so high reliability and low maintenance. Instrument parameters can be stable over a long period of time. The use of piezoelectric stress sensors, high reliability, can work in the operating temperature range of -20 °C ~ +250 °C. There are analog standard signal and digital pulse signal output. It is easy to use with digital systems such as computers. It is an advanced and ideal flow meter.
Vortex flowmeter measurement error causes:
1) Insufficient length of straight pipe
2) Analog converter circuit zero drift or full scale adjustment is wrong
3) The supply voltage changes too much
4) Meter exceeds verification period
5) The difference between the inner diameter of the sensor and the pipe is larger
6) Install different hearts or gaskets into the tube
7) Sensor contamination or damage
8) There are two-phase flow or pulse flow
9) Pipeline leak
Vortex flowmeter measurement error solution:
1) Lengthen vortex flowmeter straight pipe section or install flow regulator
2) Calibration zero and span scale
3) Check the power
4) timely inspection
5) Check the inner diameter of the pipe and correct the meter factor
6) Adjust the installation, trim the gasket
7) Cleaning and replacement sensor
8) Exclude two-phase or pulsatile flow
9) Exclude leaks
As one of the leading die casting manufacturers with over 10 years of experience, Zheke Mould Company has been offering superior die casting parts for LED lighting manufacturing and other indudustries. With our professional technicians and cutting-edge die casting process, every piece of our parts comes out with reliable quality and cost effectiveness.
Our die casting services for Communication And Digital Aluminum Die Casting Parts include the use of aluminum alloys. A key advantage of using aluminum in the die casting process is its low cost - aluminum parts are much less expensive than parts produced by other manufacturing processes. From a functionality perspective, aluminum die cast parts typically weigh one-third less than steel parts, while still offering the strength and durability that is essential for any lighting fixture.
Benefits of Aluminum Die Casting for Communication And Digital Aluminum Die Casting Parts include:
• Complex shape.
• Stable quality stability and high yield.
• Casting shell is solid and durable.
• Weatherproof outdoor PCB housings and NEMA boxes for special harsh environment
• High-quality polishing, plating and painting.
• Excellent telecommunication equipment thin wall aluminum technology.
Communication And Digital Aluminum Die Casting Parts
Communication And Digital Aluminum Die Casting Parts,Communication Aluminum Die Casting Parts,Digital Aluminum Die Casting Parts,Aluminum Die Casting
Zheke Mould Technology Co. Ltd. , http://www.zkdiecasting.com