Reduce tire wear tips
Tire is the only contact between the car and the ground. It is an essential equipment for the car. The degree of wear of a tire affects its useful life, and the consequences of a flat tire during driving can be disastrous. How to extend the service life of automobile tires and reduce the degree of wear and tear?
1, tire pressure to meet the standard. The owner must inflate the tire according to the tire pressure specified by the manufacturer, not too high nor too low, otherwise it will affect the service life of the tire. Because the tire pressure is lower than the standard value, the wear of the tire shoulder increases sharply; when the tire pressure is higher than the standard value, the ground contact area of ​​the tire decreases, and the unit pressure increases. As a result, the middle tire tread wear increases and the tire rigidity increases. Therefore, the dynamic load on the wheels is increased and the carcass bursts easily.
2, control the speed. The turning of the vehicle should be based on the curved road conditions and the turning radius. Generally, the speed should be decelerated appropriately to avoid acceleration of unilateral tire wear due to inertial force and centrifugal force. When the vehicle is descending, appropriate speed should be controlled according to the size, length and road conditions of the slope. This can avoid or minimize the use of emergency braking to reduce tire wear; vehicles parking on the way and stop at the stop should develop the habit of safe gliding.
3, choose a good point of ground travel. When driving on uneven roads or on construction roads, one must select the road surface to reduce the impact between the tires and the road surface to avoid damage to the machine parts and tires; secondly, to slow down slowly to avoid tire jolts and strong vibrations; through muddy sections, you should choose A more solid, non-slippery place is adopted to avoid severe cuts and scratches on the tires and the sidewalls due to sagging of tires, idling in place, and severe heat generation.
4, no cracks in the tread. Regularly check the tire surface for cracks, deformation and other defects. The groove of the tire gradually becomes shallow due to wear and tear. If it is worn out, it will lose its effect on drainage and slippage, and the performance of the automobile will be greatly reduced. The seemingly small crack is a hidden danger of puncture at high speeds. In addition, we must pay attention to the timely removal of small stones in the groove, if not treated in time will also cause the danger of puncture.
The above is a method for extending the service life of automobile tires and slowing the tires' wear. It is hoped that owners must develop good driving habits when driving a car. Only by caring for one's own vehicle will it be possible to protect the safety of the vehicle.
China Flat Bar Punching Machine Suppliers
CNC Hydraulic Flat Bar Punching, Marking, shearing machine
CNC Hydraulic Punching Machine for striped steel,
CNC hydraulic punching machine for plate
Used for punch and mark of joint plate in the field of iron tower. It is also used to punch and mark metal plate.
Bar Cutting Machine,Flat Bar Cutting Machine,Flat Bar Steel Cut Machine,Cnc Flat Bar Punch Machine
Shandong ShuoFang Environmental Technology Co., Ltd. , https://www.chinafincnc.com