What is the principle of rvs copper twisted pair?

When rvs copper twisted-pair wire is used for a long time, the temperature must not exceed 70 degrees, the laying temperature of the cable should not be less than 0 degrees, and the allowable bending radius of the cable whose outer diameter is less than 25 millimeters should not be less than 4 times the outer diameter of the cable; The allowable bending radius for a cable of 25 mm and above shall not be less than 6 times the outer diameter of the cable. The rvs copper core twisted pair has an additional layer of jacket that can be used directly outdoors and in environments where movement and friction are required. In twisted pair cables, different pairs have different twist lengths. Generally speaking, twist lengths are within 38.1 mm to 14 cm and are twisted counterclockwise.

Adjacent twisted wire pairs over the length of 12.7 mm, twisted pair copper core RVS generally denser twisting of the stronger anti-jamming capability, compared to other transmission media, UTP transmission distance, channel width when the data transfer speed and the like terms are subject to certain restrictions increase the rotational speed of the coil, the number of turns of the coil, these two methods can increase the induced current, part of the conductor cutting magnetic induction closed circuit motion in the magnetic field lines There are induced currents in the conductor, the magnitude of the induced current is proportional to the strength of the magnetic field, the length of the conductor, and the speed of cutting the line of magnetic induction. rvs Copper UTP wiring in the whole network should only use a standard network cable. If the standards are not uniform, even more serious is that the construction process in the event of errors cables in a bundle of cables is difficult to find and culling.